Halsey Taylor HTHB-HAC Installation, Care & Use Manual
Also see for HTHB-HAC: The installation, care and use
      |
Page 1 98658C (Rev. B - 1/11)HACFSCWSD*1D HAC8FSCWSBLQ*1D HACFSCDWSBL*1D HAC8FSCWSBLQ*1D HACFSCWSDBL*1DHTHB-HAC Factory PrepHydroboost Bottle Filling Station and CoolerHTHB-HAC Bottle Fillers are among the easiest to install on the market today. Toinsure you install these models easily and correctly, PLEASE READ THESESIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECKYOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, ANDOTHER APPLICABLE CODES. After installation, leave these instructions with theFountain for future reference.IMPORTANTTHIS IS AN INDOOR APPLICATION ONLY.ALL SERVICE TO BE PERFORMED BY ANAUTHORIZED SERVICE PERSON.IMPORTANT! INSTALLER PLEASE NOTE.THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINESIS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THEBUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELEC-TROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER.THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGSPROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAINFROM THE BUILDING PLUMBING SYSTEM. WE SUGGEST THAT THE BOTTLE FILLING STATION AND WATERCOOLER BE PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPTER (GFCI).INSTALLERTOOLS REQUIREDBUT NOT PROVIDED:SAFETY GLASSESGLOVESELECTRIC DRILL3/4” WRENCH OR CRECENT WRENCH5/16” NUT DRIVERUTILITY KNIFETAPE MEASUREPENCILCENTER PUNCH1/2” SOCKET & RATCHET WRENCH5/32” ALLEN WRENCHInstallation/Care/Use Manual |
Related manuals for Halsey Taylor HTHB-HAC
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine