M15SMax. RPM 15,000 rpmMax. RCF 21,206 xgTimer < 100 min, pulse,continuousACC / DEC Ramps 9/10Quick Guide M15SCat. No. : M15SLid OpenStart / Stop / Short spinDisplay & ControlSetting RPM / RCF, Time, ACC / DEC Program SAVE / CALL Short SpinSettingButtonDisplay WindowRPM / RCF / Time/ Temp / Program / Rotor ID / ACC / DECProgram SAVE/CALLSaving/Calling up a program (Up to 10)Pressthe Setup /EnterbuttonSelect a parameter to bechanged (Press the ◀or▶ button) → Up or down the values(Press the ▲or▼ button)SettingmodeSAVECALLRPM setting mode : RPM flashesRCF setting mode : RCF flashesTime setting mode : 00’ 00’’ flashesTemperature setting mode : 00℃ flashesACC/DEC setting mode : Accel / Decel flashesSelect the program number → Press the Enter button →Set the parameters → Press the Setup / Enter buttonSelect the program number → Press Setup / Enter buttonPressthe EnterPress the Call /save buttonSelect the programnumber (Press the▲ or ▼ button)Press the EnterSet the desiredSpeed(see ‘Setting RunParameters’)Press the shortbutton more than2 secSerial No. Installation Date.