Harbor Freight Tools 66121 Instructions And Precautions
  | |
Contents | 
InstructIons and precautIonsdistributed exclusively by Harbor Freight tools®.3491 Mission Oaks Blvd., Camarillo, CA 93011Visit our website at: http://www.harborfreight.comsaVe tHese InstructIons. read allprecautIons and InstructIons.Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork containedherein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagramswithin this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightlyfrom the product described herein. Tools required for assembly and service may not be included.For technical questions or replacement parts, please call 1-800-444-3353.specIFIcatIonsPower SourceHeadphones: 2 - AAA Batteries.Transmitter: 2 - AAA BatteriesBatteries Not Supplied.Emitting Range 85 MHzunpackIngWhen unpacking, check to make sure that theitem is intact and undamaged. If any parts are miss-ing or broken, please call Harbor Freight Tools at thenumber shown on the cover of this document as soonas possible.Important saFetYInFormatIonThis product is not a toy. Do not allow children1.to play with or near this item.Use for intended purpose(s) only.2.Inspect before use; do not use if parts are3.loose or damaged.Maintain product labels and nameplates.4.These carry important safety information. Ifunreadable or missing, contact Harbor FreightTools for a replacement.This device complies with part 15 of the FCC5.Rules. Operation is subject to the followingtwo conditions: (1) This device may not causeharmful interference, and (2) this device mustaccept any interference received, including in-terference that may cause undesired operation.assemblY/setupTurn the ON/OFF Switch “OFF” on both the1.Transmitter, and Headphones. Slide open theBattery Compartment Cover on the Left Ear-piece and, observing correct polarity, insert 2 -AAA batteries (not supplied). Slide the BatteryCompartment Cover closed.Open the Battery Compartment Cover on the2.base of the Transmitter. Observing correctpolarity, insert 2 - AAA batteries (not supplied).Close the Battery Compartment Cover.operatIon InstructIonsPlug the Standard Use Cable into the Audio-In1.Socket on the Transmitter.Plug the other end of the Standard Use Cable2.into the Audio-Out (Headphones Symbol)Socket on your TV, DVD, VCD, PC, or musicsystem.Slide the ON/OFF Switch on front of the Trans-3.mitter to ON, the Power Light will come on. Toturn the power off, slide the Switch and thePower Light goes off.Pull out the Antenna on the Headphones and4.turn on the Volume Control (also on the Head-phones), the Power Light will come on.note: Volume of the received sound is deter-mined by Volume control on both the Head-phones, and your audio system.After you are finished using the Wireless5.Headphones, turn off the Power to both theTransmitter and the Headphones. Replacethe Headphones on Seat located on top of theTransmitter.WIrelessHeadpHones66121 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine