Wheel Bonnet tie doWnModel 97230Set up And operAting inStructionSDiagrams within this manual may not be drawn proportionally.Due to continuing improvements, actual product may differ slightly from the product described herein.distributed exclusively by harbor Freight tools®.3491 Mission Oaks Blvd., Camarillo, CA 93011Visit our website at: http://www.harborfreight.comread this material before using this product.Failure to do so can result in serious injury.SAVe thiS MAnuAl.Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion ofthis manual or any artwork contained herein may be reproduced in any shapeor form without the express written consent of Harbor Freight Tools.For technical questions or replacement parts, please call 1-800-444-3353.Keep this manual for the safety warnings and precautions, assembly, operating, in-spection, maintenance and cleaning procedures. Write the product’s serial number inthe back of the manual near the assembly diagram (or month and year of purchase ifproduct has no number). Keep this manual and the receipt in a safe and dry place forfuture reference.generAl SAFety ruleSKeep work area clean and well lit. Cluttered or dark areas invite accidents.Keep children and bystanders away while securing the tie down. Distrac-tions can cause you to lose control.Stay alert, watch what you are doing and use common sense when connectingthe Tie Down. Do not use it to secure an object while you are tired or under theinfluence of drugs, alcohol or medication. A moment of inattention while attach-ing may result in serious personal injury.use safety equipment. Always wear eye protection. Safety equipmentsuch as dust mask, non-skid safety shoes, hard hat, or hearing protectionused for appropriate conditions will reduce personal injuries.Do not overreach. Keep proper footing and balance at all times. This enablesbetter control of the Tie Down in unexpected situations.1.2.3.4.5.