Harman Kardon KP 1 Owner's Manual
Also see for KP 1: Brochure & specsBrochure & specsBrochure & specsBrochureSpecifications
     | |
KP 1 In-Wall KeypadPower for the Digital Revolution ™Decora is a registered trademark of Leviton Manufacturing Company, Inc.Micro Link is a trademark and Xantech is a registered trademark of Xantech Corporation.Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark,of Harman Kardon, Inc.250 Crossways Park Drive, Woodbury, New York 117971-800/422-8027 (USA only) Fax: 516/682-3523© 2001 Harman Kardon, IncorporatedPrinted 9/01 Part No. YiAK-K1000-01AIntroductionCongratulations! As the owner of a KP 1 in-wall keypad, you own anaccessory that adds convenience and versatility to your home audio systemby providing independent control in each room or zone powered by aHarman Kardon PA 4000 multichannel power amplifier. The elegant, three-button design offers power on/off and volume control and is prewired toaccept an optional infrared (IR) sensor to allow remote control of virtually anydevice equipped with a remote IR input.The KP 1 uses an optional Decora®-style cover plate for coordination withother wall-mounted switches. The KP 1 does not require an external powersupply, as all needed power is provided through the connection to thePA 4000.In order to fully enjoy the benefits of remote keypad control, please take afew minutes to read this owner’s guide. It contains important information thatwill guide you step by step through the correct and safe installation of yourkeypad. If you do not have experience installing in-wall electrical andtelecommunications components, we recommend that you have the KP 1installed by a properly trained professional.If you have any questions about this product, its installation or its operation,please contact your retailer or custom installer. They are your best source ofproduct information.Features Elegant, Three-Button Design Up to Four KP 1 Keypads May Be Attached to the PA 4000 forIndependent Control of Separate Rooms and Zones Accepts Optional IR Sensor That Transmits Commands to MostRemote-Controllable Products Through a PA 4000 Designed for Use With Optional Decora-Style Wall-Plate ThatBlends in With Other In-Wall Electrical Components Mounts in Standard Electrical Junction Box or With Plaster Ring RJ-45 Connector Offers Easy Installation With PA 4000 Amplifier 3-Pin Eurostyle Connector for Optional IR SensorTypographical ConventionsIn order to help you use this guide with the front panel controls and rear panel connec-tions for both the KP 1 and PA 4000, certain conventions have been used.Example – indicates a specific front panel button or rear panel connection jack1 – indicates a KP 1 front panel control or feature¡ – indicates a KP 1 rear panel connection or featurea – indicates a PA 4000 rear panel connection or switch |
Related manuals for Harman Kardon KP 1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine