IC Realtime HD-AVS Quick Start Manual
Also see for HD-AVS: User manualQuick start guide
     |
Quick Start GuideHD-AVS PanoramicBullet CameraFeatures and SpecificationsA. OverviewB. Cable InterfaceCamera InstallationA. Installation StepsB. Lens AdjustmentC. Waterproofing ConnectorsFAQ and Lightning ProtectionA. Dip Switch SettingsB. FAQ223-44456Table Of Contentswww.icrealtime.comIMPORTANT SAFEGUARDS AND WARNINGSElectrical SafetyAll installation and operation here should conform to your local electrical safety codes. Thepower shall conform to the requirement in the SELV (Safety Extra Low Voltage). Please checkproduct specifications for power requirements. We assume no liability or responsibility for allthe fires or electrical shock caused by improper handling or installation. We are not liable forany problems caused by unauthorized modification or attempted repair.Transportation SecurityCare must be given to avoid heavy stress, violent vibration or water damage duringtransportation, storage and installation.InstallationDo not apply power to the camera before completing installation. Please install the properpower cut-off device during the installation connection. Always follow the instruction guide themanufacturer recommended.Qualified engineers neededAll the examination and repair work should be done by the qualified service engineers. We arenot liable for any problems caused by unauthorized modifications or attempted repair.EnvironmentThis series network camera should be installed in a cool, dry place away from direct sunlight,inflammable, explosive substances and etc. Please keep it away from the electromagneticradiation object and environment. Please make sure the CCD (CMOS) component is out of theradiation of the laser beam device. Otherwise it may result in CCD (CMOS) optical componentdamage. Please keep the sound ventilation. Do not allow the water and other liquid falling intothe camera. Lightning-proof device is recommended to be adopted to better prevent lightningdamage. The grounding studs of the product are recommended to be grounded to furtherenhance the reliability of the camera.Daily MaintenancePlease shut down the device and then unplug the power cable before you begin dailymaintenance work. Do not touch the CCD (CMOS) optic component. You can use the blower toclean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there istoo much dust, please use the water to dilute the mild detergent first and then use it to cleanthe device. Finally use the dry cloth to clean the device. Please put the dustproof cap to protectthe CCD (CMOS) component when you do not use the camera.AccessoriesBe sure to use all the accessories recommended by manufacturer. Before installation, pleaseopen the package and check all the components are included. Contact your local retailer ASAPif something is broken in your package. |
Related manuals for IC Realtime HD-AVS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine