ICM Controls ICM325HN User Manual

Also see for ICM325HN: Installation, operation & application guide

ICM Controls ICM325HN User Manual Manual pdf 1 page image

• Line voltage: 120, 208, 240, and 480 VAC• Control voltage: 18-30 VAC• Frequency: 50-60 Hz• Operating temperature: -40ºF to +176ºF (-40°C to +75°C)• Sensors: 10K ohms at 77°F (25°C)• Heat pump override: 24 VAC N.C. or N.O.Note: A maximum of three sensors can be connected to the control.• Weight: 12 ounces (341 grams)Note: The ICM325HN should be applied to motors and equipment that have been designated by theirrespective manufacturers as capable of being speed controlled.• Mounting:– Surface mount using (4) #8 screws– The ICM325HN should be surface mounted to a clean metal or other thermally conductive surface formaximum heat dissipation– It is recommended that the ICM325HN be mounted away from the condenser exhaust air in order to maintainlower operating temperaturesSpecificationsInstallation of the ICM325HN shall be performed by trained technicians only. Adhere to all local and nationalelectric codes.Disconnect all power to the system before making any connections.Caution!ICM325HNInstallation, Operation & Application GuideFor more information on our complete range of American-madeproducts – plus wiring diagrams, troubleshooting tips and more,visit us at www.icmcontrols.comHead PressureControl withOptionalHeat Pump OverrideTemperature sensitivecontrol regulateshead pressureICM325HN Typical Installation

/ 4

Related manuals for ICM Controls ICM325HN