ICP DAS USA CAN-2024C Quick Start Manual

Also see for CAN-2024C: User manual

ICP DAS USA CAN-2024C Quick Start Manual Manual pdf 1 page image

CAN-2024C Quick Start Ver. 1.20, Apr/2017 1CAN-2024C Quick Start[ Package List ]Hardware SpecificationCAN InterfaceCANopen Specification CiA DS-301 v4.02, DS-401 v2.1Node ID 1~99 selected by rotary switchBaud Rate (bps) 10k, 20k, 50, 125k, 250k, 500k, 800k and 1MError Control Node Guarding protocol and Heartbeat Producer protocolTerminator Resistor Switch for 120 Ω terminator resistorConnector 5-pin screwed terminal block(CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)Analog OutputChannels 4Output Type 0 ~ 5V, +/- 5V, 0 ~ 10V, +/- 10V, 0 ~ 20mA, 4 ~ 20mAResolution 14-bitAccuracy +/-0.1% of FSR for voltage output, +/-0.2% FSR for current outputOutput Capability 10V@5mAIntra-module Isolation +/-0.1% FSRESD Protection +/-4 kV, Contact for each channelPowerInput range Unregulated +10 ~ +30 VDCPower Consumption 1.5 WEnvironmentOperating Temp. -25 ~ 75 ℃Storage Temp. -30 ~ 80 ℃Humidity 10 ~ 90% RH, non-condensingFor more information about CAN-2024C, please visit the following website:http://www.icpdas.com/products/Remote_IO/can_bus/can-2024c.htmCAN-2024C Software CDScrew Driver(1C016) Quick Start