IDEC HS5E-K Manual

IDEC HS5E-K Manual Manual pdf 1 page image

57HS5E-K Interlock Switches with KeyRatingsContact RatingRated Insulation Voltage (Ui) (Note 1) 250VRated Thermal Current (Ith)Operating temperature:–25°C to 60°C: 2 5A max60°C to 65°C: 1 5A max65°C to 70°C: 1 0A maxRated Voltage (Ue) 30V 125V 250VRatedCurrent(Ie)(Note 2)AC Resistive Load (AC-12) − 2A 1AInductive Load (AC-15) − 1A 0 5ADC Resistive Load (DC-12) 2A 0 4A 0 2AInductive Load (DC-15) 1A 0 22A 0 1AMinimum applicable load (reference value) = 3V AC/DC, 5 mA(Applicable range may vary with operating conditions and load types )Note 1: UL rating: 125VNote 2: TÜV rating: AC-15, 0 5A/250V, DC-13, 0 22A/125VUL, c-UL rating: Pilot Duty AC 0 5A/125V,Pilot Duty DC 0 22A/125VKey SpecificationsOperating Method 2-position maintainedMechanical Durability 100,000 operations minimumInsertion/Removal Durability 10,000 operations minimumOperator Strength 1 0 N·m minimumDirect Opening Force 0 6 N·m minimumDirect Opening Angle 60° minimumPart No. DevelopmentH S 5 E - K V A 0 L 0 3 - 2 A 5 0 1VA:VD:Circuit CodePilot Light0: NoneMainCircuit Door MonitorCircuit Lock MonitorCircuit1NC, 1NO2NC——1NC, 1NO2NCRear Unlocking ButtonL: WithBlank: WithoutCable Length03: 3m05: 5mKey removal specificationsA: Removable inall positionsB: Removable at UNLOCKC: Removable at LOCKKey numberBlank: Standard Keynumber (500)or501 to 515Operator position2: 2-positionGeneral SpecificationsApplicable StandardsISO14119, IEC60947-5-1,EN60947-5-1 (TÜV approval), EN1088,GS-ET-19 (TÜV approval),UL508 (UL recognition),CSA C22 2 No 14 (c-UL recognized)IEC60204-1/EN60204-1(applicable standards for use)OperatingTemperature -25 to +70°C (No freezing)Relative Humidity 45 to 85% (No condensation)Storage Temperature -40 to +80°C (No freezing)Pollution Degree 3Impulse WithstandVoltage 2 5 kVInsulation Resistance(500V DC megger)Between live and dead metal parts: 100 MΩminimum (500V DC megger)Between live metal part and ground:100 MΩ minimum (500V DC megger)Between live metal parts:100 MΩ minimum (500V DC megger)Between terminals of the same pole:100 MΩ minimumElectric Shock Class Class II (IEC61140)Degree of Protection IP65 (IEC60529)Shock Resistance Operating extremes: 100 m/s2Damage limits: 1,000 m/s2Vibration ResistanceOperating extremes:10 to 55 Hz, amplitude 0 35 mmDamage limits: 30 Hz, amplitude 1 5 mmActuator OperatingSpeed 0 05 to 1 0 m/sDirect Opening TravelActuator HS9Z-A51: 11 mm minimumActuator HS9Z-A51A/A52/A52A/A53/A55: 12 mmminimumDirect Opening Force 80N minimumActuator RetentionForce (Note 1) 1,400N minimum (GS-ET-19)Operating Frequency 900 operations per hourRear UnlockingButton MechanicalDurability3,000 operations minimum (HS5E-KL)Mechanical Durability 1,000,000 operations minimum (GS-ET-19)Electrical Durability100,000 operations minimum (AC-12, 250V, 1A)1,000,000 operations minimum (24V AC/DC, 100mA)(Operating frequency: 900 operations per hour)Performance between41 and 42 when headis removedMechanical durability: 10 operations minimumInsulation resistance: 100 MΩ (initial value)Withstand voltage: 1,000V for 1 minute (initial value)Conditional Short-circuit Current 50A (250V) (Note 2)Cable UL2464, No 22 AWG(12-core, 0 3 mm 2 or equivalent/core)Cable Diameter ø7 6 mmWeight (approx ) 510g (3m cable), 680g (5m cable)Note 1: See page 61 for actuator retention forceNote 2: Use 250V/10A fast-blow fuse for short-circuit protectionNew interlock switches that can be locked and unlocked with a key.• Head removal detection circuitry• High-security pin tumbler key is used Sixteen types of keynumbers are available• Available with rear unlocking button for emergency escape• Accessory available for aluminum frame mounting• Gold-plated contacts• The locking strength is 1400N minimum (GS-ET-19)• The head orientation can be rotated, allowing 8 differentactuator entries• Metal actuator entry slot ensures high durability• Actuator with rubber bushings alleviates the impact ofthe actuator entry slot• Environmentally-friendly RoHs directive compliant• Double insulation structure No need for grounding• Compact body: 35 × 40 × 146 mmRight-angle Actuator(SUS304)StraightActuatorRight-angle Actuatorw/rubber bushingsAngle AdjustableActuator (vertical)HS5E-K