IVDT ED3-AT SkidWeigh Plus Operator's Manual

Also see for ED3-AT SkidWeigh Plus: Installation & Calibration

IVDT ED3-AT SkidWeigh Plus Operator's Manual Manual pdf 1 page image

Operator Usage GuideED3 / ED4-AT SkidWeigh Plus (Weighing Scale)Start Up* Turn on ignition switch* The LCD display will show software version, serial number and will indicate Date / Time.(Standard ED3 / ED4-AT SkidWeigh Plus version without operator access control)* System with Optional Operator Access Control:System will prompt operator to input valid operator ID# or to scan operator RFID card* Complete OSHA safety check function, if applicable* LCD display will show Date / Time and vehicle will be operational1. Proper Weighing Procedure- Lower loaded forks to ground- LCD Display must show Date / Time- Activate lift control lever same as during normal usage and lift load approx. 2” (5 cm) off the ground- Do not manipulate the tilt, side shifter or move vehicle during the weighing cycle- Within few seconds load weight will be indicated on LCD Display.-2. Accumulative Load Weight Measuring Cycle (Without Waybill ID# input)- With LCD Display showing first load weight, press “Enter key” ↵ to start accumulating loads.- The LCD Display will show first load weight. Keep lifting loads and press “Enter key” ↵.- With each additional load lifted system will show TOTAL accumulative load weight.- On last load weight lifted press “Enter key” ↵ and press “P” key to complete cycle.“Enter key” ↵“P” Key- Printing tickets (system withonboard mobile printer)- Save data to USB port- Waybill ID# input- Decimal input (used withparts count by weight)Impact Monitoring Icon (Optional)Scroll Keys“F0” KeyOperator Function Key- Bluetooth printer / scannerpairing functions- TARE Function- Parts count by weight- Pounds or kilograms displayNote: By pressing “P” key the accumulative load weight cycle will be reset.Load weight information will be automatically saved to USB port, printed ticketprovided if the Bluetooth onboard printer is utilized. Weighing data will be sendto the base station.

/ 2

Related manuals for IVDT ED3-AT SkidWeigh Plus