Icom IC-2820H Basic Operations

Also see for IC-2820H: Instruction manual Service manual Service manual Service manual Instruction manual

Icom IC-2820H Basic Operations Manual pdf 1 page image

Prince William County ARESIC-2820 Quick Reference Guide v.1.4Icom IC-2820H Basic OperationsThese instructions are not a substitute for reading the manualNOTE: The IC-2820 is a dual receive radio with a left and right side and set of keys andknobs. The active side is identified by a MAIN icon in the top “left” corner of the ac-tive display. When the instructions refer to MAIN key or knob, they refer to the activetransceiver side and do not affect the inactive side until the inactive side is made active.To select the MAIN band, either press the DIAL knob on the side you wish to set ac-tive.The IC-2820 has a magnetic attached face plate. The connector cable may not be attached to the radio initially (use the short one, notthe long extender cable). Note that the six-pin end goes into the main unit and the four-pin end goes into the face plate. The micro-phone should already be attached and covered by a faceplate.IC-2820 Front Panel: 1) Power, 2) Function/Lock key 3) Output Power/Priority, 4) Tone/DTMF, 5) Duplex/Monitor, (Button 2-5 are forthe MAIN band only), 6) SQL, 7) VOL, 8) DIAL, 9) MAIN band (push), 10) VFO/Tune/Scan, 11) Memory/Call/Memory write.IC-2820 LCD Panel: Of note: 1) Operating mode indicator, 2) Duplex indica-tors, 3) Name indicator if programmed, 4) Tone indicator, 5/6) Not relevantwithout D-Star board, 10) Lock function enabled, 17) Weather indicators ifprogrammed, 19) Power level, 22) MAIN band indicator IC-2820 Main body: 1) Controller connector (6-pin), 2) & 3) Not used, 4) Packet data jack, 5)Mic, 6) Antenna (primary), 8) Antenna(optional), 9) External speaker, 10) Externalspeaker—see External speakers.

/ 4

Related manuals for Icom IC-2820H