Jack coverNOTE: Attach the jackcover when the optionalequipment is not used.EMERGENCYPush func (found at the bottom right of the keypad)then [0 121.5] (found next to the func key). Usethe PTT to call on the emergency frequencyQUICK OPERATION GUIDEia14GENERALIf the key marking on the keypad is in black, push toactivate. For secondary functions, first push funcand then the desired green-marked keyKNOB (1)Rotate to turn the radio power on or offand to adjust the audio levelSIDE KEYS (2)• SET SQUELCHPush [SQLY] or [SQLZ] (2) to the point wherenoise is just muted. Push [CLR] to return to frequency mode©2008 Icom America Inc. The Icom logo is a registered trademark of Icom Inc.40084funcfuncfunc123SIDE TONE FuNCTION (for A14 only)When using a third-party headset, the transceiver outputs yourtransmitted voice to the headset for monitoring, and a headsetadapter is required• Connect the optional headset with the transceiver via theOPC-499 headset adapter– Illustration shows where the headset adapter jackinsertes into the radio• SETTING THE SIDE TONE LEVELPush [PTT] (see drawing) toturn the transmit mode ONDuring transmit, push [Y ]or[ Z] to adjust the level– ‘ST--0’ is OFF and ‘ST-10’ isthe maximum level– Illustration shows side tonelevel indicationFREQuENCIES/CHANNELS NOTESSide tone level is indicated[PTT][Z]/[Y]