Icom OPC-2218 LU Instructions Manual

Icom OPC-2218 LU Instructions Manual Manual pdf 1 page image

Thank you for purchasing the OPC-2218LU datacable. The cable is used to connect an Icomtransceiver/receiver to a PC for data cloning, usingIcom cloning software.Download the USB driver and the installation guidefrom the Icom website.Please read these instructions thoroughly beforeusing your data cable.INSTRUCTIONSDATA CABLEopc- 2218luREAD ALL INSTRUCTIONS carefully and thoroughlybefore using the data cable.SAVE THESE INSTRUCTIONS! — Theseinstructions contain important safety and operatingdetails for the data cable.WORD DEFINITIONCAUTION Equipment damage may occur.NOTEIf disregarded, inconvenience only.No risk of personal injury, fire orelectric shock.CAUTION: USE ONLY INDOORS! NEVER expose thedata cable to rain, snow or any liquids.CAUTION: NEVER let metal, wire, or other objects touchany internal part of the connectors.CAUTION: NEVER use a USB cable other than the OPC-1637. DO NOT extend the USB cable. If a different cable ora cable longer than 1.5 m (4.9 ft) is used, a data error mayoccur.DO NOT use harsh solvents such as benzine or alcoholwhen cleaning, as they will damage the cables.Ensure that your PC supports USB port operation byconfirming the Universal Serial Bus controller is in the PC’sDevice Manager.Connect the data cable (OPC-2218LU) to the USB cable(OPC-1637), then connect the USB cable to the PC’s USBport directly, or to a self-powered USB hub.Approximately 20 mA of current is required for the datacable. Insufficient current capacity of the USB port cancause unstable cloning operation and a cloning error.OPC-1637 Ferrite EMI filter**See the USB Driver Installation Guide for the filterattachment details.• Usable temperature range0˚C ~ +60˚C (+32˚F ~ +140˚F)• Cable length (Approximately)OPC-2218LU: 530 mm (20.9 in)OPC-1637: 1500 mm (4.9 ft)• Weight (Approximately)OPC-2218LU: 35 g (1.2 oz)OPC-1637: 49 g (1.7 oz)Download and install the latest OPC-2218LU USBdriver from the Icom website before you connect theOPC-2218LU and OPC-1637 to your PC.NOTE: If you have already installed the OPC-478UC USB driver, the OPC-2218LU cable canimmediately be used.A PC with the following is required:• Microsoft ® Windows ® 10 32 bit/64 bitMicrosoft ® Windows ® 8.1 32 bit/64 bitMicrosoft ® Windows ® 7 32 bit/64 bit• A USB 1.1 or 2.0 portThe USB driver cannot be used with “RT” versionsof Microsoft ® Windows® 8.1.CAUTION:Install the USB driver before you connect the datacable to the PC.Never connect the data cable to the PC until theUSB driver installation has been completed.If you have connected the cable, remove it andthen install the USB driver.IMPORTANTEXPLICIT DEFINITIONSPRECAUTIONSDISPOSALSUPPLIED ITEMSSPECIFICATIONSSYSTEM REQUIREMENTSA6951H-1G-8 Printed in Japan© 2011―2019 Icom Inc.1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, JapanD File downloadingThese instructions are based on using Windows® 10.q Go to the website address shown above.w Click the [Support] button.e Click “Firmware Updates/Software Downloads.”Clickr Click the OPC-2218LU [USB Driver] link in theOption group.t Read “Regarding this Download Service”carefully, then click [Agree].Agree Clicky Click [Save] to starts download.Information:If you select another destination folder, click [Saveas] and select the location to save.• “***” differs, depending on the driver version.u After the download is completed, unzip the file.• The firmware is compressed in the “zip” format.i Install the driver according to the instructions in theguide.• The installation guide is on the Icom website.Return to step 1 and 2, then click “Manual / DOCDownloads.”Download the USB (Universal Serial Bus) driver in order to use your OPC-2218LU.• The USB driver and the installation guide can be downloaded from the Icom website shown below.http://www.icom.co.jp/world/index.htmlNOTE:• You need Adobe ® Acrobat ® Reader ® to view the downloaded USB driver installation guide.• If you do not have Adobe ® Acrobat ® Reader ®, download it from the Adobe Systems Incorporated’s website.ClickSave ClickSelect thelocation to save.CD-295602-***.zipUSB DRIVER AND INSTALLATION GUIDE DOWNLOADIcom, Icom Inc. and Icom logo are registered trademarks of IcomIncorporated (Japan) in Japan, the United States, the United Kingdom,Germany, France, Spain, Russia, Australia, New Zealand, and/or othercountries.Adobe, Acrobat, and Reader are either registered trademarks ortrademarks of Adobe Systems Incorporated in the United States and/orother countries.Microsoft and Windows are registered trademarks of MicrosoftCorporation in the United States and/or other countries.All other products or brands are registered trademarks or trademarks oftheir respective holders.The crossed-out wheeled-bin symbol on yourproduct, literature, or packaging reminds youthat in the European Union, all electrical andelectronic products, batteries, and accumulators(rechargeable batteries) must be taken to designatedcollection locations at the end of their working life. Do notdispose of these products as unsorted municipal waste.Dispose of them according to the laws in your area.NOTE:There are two differentOPC-2218LUs:• One has no marks on the label. (previous)• One has a “B” marked on the label.The previous (unmarked) OPC-2218LU is NOT usable withMicrosoft® Windows® 10 and 8.1.Oct. 2019

/ 2

Related manuals for Icom OPC-2218 LU