Icy Box IB-3680SU3 Quick Installation Manual

Icy Box IB-3680SU3 Quick Installation Manual Manual pdf 1 page image

Brief NotesOperation EnvironmentTemperature 0 ~ 50 °C Humidity 90 ％ RHRemindersFront Panel OverviewLED Indication / ButtonDescriptions2. eSATA Link interface use3. USB Link interface useBlueOrangePower onSleep mode4.Link interface optioneSATA5.Link interface optionUSB6.Smart Fan automatic mode7.Smart Fan manual mode8.Fan speed level 19.Fan speed level 210.13. Interface button14. Synchronization mode button15. Smart fan button : auto, manual and fan speed from level 1to level 316.BluePurpleactiveaccessHDD1 / HDD2 / HDD3 / HDD4 / HDD5 / HDD6 / HDD7 / HDD817. Key slotFan speed level 311.12. Synchronization comes in 3 modes:When the PC is off, the device goes off In 15 seconds.When the PC is off, the device goes to sleep mode.Synchronization is off.BlueOrangeOff657 8 9 10 11 12 13 14 151716http://www.raidsonic.dePlease visit our website for latest manualSTEP 11STEP 22STEP 33Trouble ShootingSTEP 77Support USB transfer speeds up to Super Speed (5 Gbit/s),eSATA transfer speed (1.5~3.0 Gbit/s)2.Interface of USB / eSATA can not be used at the same time.3.ReferencesSmart fan controlled by the built-in thermal sensorand it comes with 2 modes (auto / manual) and 3 levels of speed:1.Level 1: higher than 55 °CLevel 2: 45 °C ~ 54 °CLevel 3: below 45 °C2,500rpm1,800rpm1,200rpm~~~3,500rpm2,500rpm1,800rpmUnder Windows Vista / 7, users can enable GPT when initializingHDD with a total capacity of more than 2 TB.4.1 2 341. It needs to be pressed and held for 3 secondsto power off.This design prevents accidental power off.Power button• Follow all instructions.• Do not place this device near water.• Clean only with dry cloth.• Do not block any ventilation openings.• Install in accordance with the manufacturer’s instructions.• Do not place near any heat sources such as radiators, heat registers,stoves, or the devices (including amplifiers) that produce heat.• Protect the power cord from being walked on or pinched particularly atplugs, convenience receptacles, and the point where they exit fromthe devices.• Power supply cords should be routed so that they are not likely to bewalked on or pinched by items placed upon them or against them.• Only use attachments/accessories specified by the manufacturer.• Unplug this during lightning storms or when unused for longperiods of time.• Refer all servicing to qualified service personnel. Servicing is requiredwhen the devices has been damaged in any way, such as power-supplycord or plug is damaged, liquid has been spilled or objects have falleninto the devices, the devices has been exposed to rain or moisture,does not operate normally, or has been dropped.• Carefully read and follow the Quick Install Guide and User Manual.• Do not drop or shake the device.• Do not move the device when it is powered on.• Do not overload wall outlets.1. If the device (8 HDDs installed) is connected to the PC with eSATA cable and the SATA HDD icon does not come out in 8, please check if the eSATAinterface card supports Port Multiplier or update the eSATA driver version.2. If the transfer rate is not normal, please check if the SATA HDD jumper is set up in 1.5 or 3.0 Gbit/s.3.7. If the fan stops working, do not dismantle it. Please send back to the retail store immediately.6. If the noise is still present, change the device with another fan of size 80x80x20mm 2 pins. Otherwise send the device back to the retail store.Black cableRed cablePositive(electrode)Negative(electrode)8. To take the HDD out from the device, slightly press down the handle and pull it out.It needs to be pressed and held for 3 secondsto power off.This design prevents accidental power off.For Macintosh users, under MAC 10.6.X or later, it's strongly recommended not to have the same name for all the HDDs.For Windows users, if the device could not recognize more than 5 HDDs when using eSATA interface,please check if the eSATA port of the motherboard and PCI-e host card can recognize more than 5 hard drives.4.If there is noise with the fan, unscrew and take out the fan cover, pull out the power cord, clean the fan and assemble it back.5.Operation SystemWindows Vista (32bit/64bit) / Windows 7 (32bit/64bit)Windows 8 (for PC version only)(under MBR partition, supports total capacity up to 2 TB only)Windows Vista (32bit/64bit) / Windows 7 (32bit/64bit)Windows 8 (for PC version only)(with GPT partition enabled, supports total capacity of more than 2 TB)Mac OS X 10.8 or later3.5’’ SATA I/II/III HDD8-bay external JBOD enclosureQuick Installation GuideIB-3680SU3CMYCMMYCYCMYK

/ 2

Related manuals for Icy Box IB-3680SU3