J.Burrows JBMATEL12K User Manual

Also see for JBMATEL12K: User's manual and troubleshooting guide Assembly instructions

J.Burrows JBMATEL12K User Manual Manual pdf 1 page image

1/3User ManualMatrix Executive Electric Height Adjustable DeskJBMATEL12K, JBMATEL15K1. Learning Process & Stroke ResetA. Learning Process:Press and button for 3 seconds after the initial assembly of the desk.B. Stroke ResetIf the desk loses power or if the display shows either of “E10, E20 and E60”,press the button for 3 seconds or until it shows , the desk will automaticallymove down to the lowest point and rebound back up. The learning process & stroke resetis then finished and will display the lowest height position.2. LiftingThe desk will go up and down when pressing or .3. Height memory settingMove the desk up or down to a desired position. Press the button after which thedisplay will blink, then press a numeric key ( 、、 ) to save the desired heightto the corresponding preset position. The display will stop blinking and exit the memorymode if there is no numeric key pressed within 5 seconds.Once you have saved the desired heights you can press that numeric key to automaticallymove the desk to the saved height.4. Setup Mode1. Press and hold the button for 3 seconds, display will show “S--" and blink.2. Press the button to move through the below setup menu functions, the function listis as follows: Unit（）: Display height on screen in centimeters or inches; Brightness（）: Brightness of the controller;1

/ 3

Related manuals for J.Burrows JBMATEL12K