JABSCO 37255-Series Manual

JABSCO 37255-Series Manual Manual pdf 1 page image

Model 37255-SeriesQUIET - FLUSHELECTRIC TOILET CONVERSIONFEATURES• Very quiet flush cycle - like a household toilet• Converts all Jabsco, Par manual toilets and earlyelectric toilets to the new Quiet-Flush System• Also converts Groco HC, HE & HF; Raritan PH,Cricket, Compact & Crown; Sealand (Mansfield) 750to 752 series and all Wilcox Crittenden toilets• Single button flush actuator - with dual function waterlevel control switch• Supplied with Par-Max 4 self-priming pump to providesea water or lake water to rinse the toilet bowl• High capacity waste macerator and bowl dischargepumpSPECIFICATIONSPORTS PAR-MAX Pump and ToiletInlet 3/4" Hose BarbOutlet 1" Hose BarbMOTOR Pump and Toilet meet U.S.C.G.& SWITCH Regulation 183.410 and ISO 8846Marine for Ignition Protection.EMC Models AvailableWATER 1-2 Quarts (Litres)/FlushCONSUMPTIONVARIATIONSMODEL NO. DESCRIPTION37255-0012 Toilet Conversion, 12 Volt DC37255-0092* Toilet Conversion, 12 Volt EMC37255-0024 Toilet Conversion, 24 Volt DC37255-0094* Toilet Conversion, 24 Volt EMC*This model is Marked and complies with EN50081-1 for suppression ofelectro-magnetic interference.OPERATIONThe Quiet-Flush Toilet Conversion provides both quietoperation and user control of water levels in the toiletbowl. A single large pushbutton switch provides a simpleflush mode by activating both the rinse water supply andthe macerator discharge pump simultaneously. An addi-tional rocker switch offers independent control of therinse water supply and discharge pump separately sothe bowl water level can be easily raised or lowered bythe user. This provides a method of minimizing wateruse, when desired, as well as a means of raising thewater level in the bowl when appropriate for user com-fort. It also allows for complete evacuation of the bowlwater while underway in rough sea conditions.INSTALLATIONThe 37255-Series Quiet-Flush Toilet Conversion is com-plete with a dedicated PAR-MAX 4 pump to provide eithersea or lake water to rinse the toilet bowl when flushing thetoilet. This pump is intended to be located remotely fromthe toilet but will function best if the distance from the toi-let is kept to a minimum. Because it is self-priming, it maybe located above the vessel’s waterline. It must beinstalled with the Pumpgard strainer (provided with thetoilet) located somewhere in the inlet plumbing to thepump. The toilet also includes a multi-function flush con-trol which should be installed in a bulkhead location thatis convenient to the toilet and allows access for wiring torun from the power source and to both the toilet dis-charge pump and the PAR-MAX rinse water pump.Before beginning the conversion, close all seacocks con-nected with the toilet's plumbing system and take pre-caution to ensure they remain closed until the conver-sion is complete. If the toilet being converted is an elec-tric toilet, disconnect the electrical power to the toilet andtake precaution to ensure it is not restored until the con-version is complete.Disconnect both inlet and discharge hoses from the oldtoilet and remove the toilet from its mounting surface. Ifthe toilet being converted is an electric model, discon-nect the electrical wiring from the toilet. Remove thehose connected to the back of the toilet's china bowl andremove the china bowl and seat & lid assembly from theold toilet base assembly. Ensure the bottom surface ofthe china bowl is clean.The waste pump can be orientedin any of the four possible mounting positions that pro-vides the best clearance from surrounding obstructionsbut is generally best positioned so it points to the rear ofthe toilet bowl. The four 6 mm machine screws must beModel 37255-Series