JALEXANDER JAE210 Instruction Manual

JALEXANDER JAE210 Instruction Manual Manual pdf 1 page image

1. To reduce the risk of electric shock, this lamp has apolarized plug (one blade is wider than the other ).The plug will fit in a polarized outlet only one way. If theplug does not fit fully into the outlet, reverse the plug.If plug still does not fit, contact a qualified electrician.Never use an extension cord unless the plug can befully inserted. Do not alter the plug.2. Do not install non-factory wiring or any other electricalcomponents. Altering or modifying the lamp in any waywill render the product unsafe.3. Avoid laying objects directly over the power supply cordto avoid cutting or damaging the wire.4. Keep curtains, shades, wall hangings and all other fabricsand objects away from the lamp shade, light switch andthe light bulb. Lamps are not designed to supportadditional weight. Do not hang any objects from thelamp or any lamp part.5. Place the lamp on a stable, level surface in an areawhere the lamp will not be tipped over or bumped.BULB REPLACEMENT1. Turn off and unplug the lamp and allow bulb to coolbefore replacing bulb.2. Light bulb should never touch the lamp shade.CLEANING AND MAINTENANCE1. To clean: use a soft, dry cloth only.2. Do not use chemical or abrasive cleaning solutions.This lamp is approved for indoor use only.DO NOT EXCEED RECOMMENDED BULB WATTAGE.Made in ChinaFor Customer Assistance:www.jalexanderhome.comRead and Save:6.1. Insert and thread socket assembly (B) into base (A) byturning clockwise until secure.2. Install light bulb into socket assembly (B).3. Pinch and insert harp (C) into the harp fittings onsocket assembly (B). Slide the caps on harp (C) overthe fittings on socket assembly (C) to secure.4. Optional: slide handle on glass door upwards to openand gently fill lamp body with non liquid artifacts.5. Remove the finial (E) from the harp (C), place theshade (D) on the harp (C) and secure with finial (E).6. Insert plug into an electrical outlet.7. Use the rotary switch on socket assembly (B) toadjust light from low, medium, high, and off intensity.NOTE: The shade should be removed when open the doorof the glass storage by sliding the handle upward.ASSEMBLY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONSMODEL #: JAE210JAE210 -T20 (LED bulb included)TABLE LAMPUse one 150 Watt, Type A 3-way bulb or LED equivalent.ABCDE

/ 2

Related manuals for JALEXANDER JAE210