JBL CSC2264H Specification

Contents

specifications

JBL CSC2264H Specification Manual pdf 1 page image

CSC2264H12” Two-Way SystemHorizontal Configuration60Ox 40OCoverage PatternFor Permanent InstallationKey Features: 2206H 12” VGC (Vented GapCooled TM LF transducer 2333 Optimized Aperture TM HFhorn with 1.5” throat 2447J 4” diaphragm, 1.5” throatcompression driver Compact trapezoidal enclosure DuraFlex finish - tough, weatherresistant and paintable Tamper resistant internal Bi-amp/Passive crossover selector Advanced Network Topology forsmooth power response and sta-ble amplifier loading Versatile complement of suspen-sion pointsThe CSC2264H is a JBL CustomShop produced adaptation of theSound Power series SP212-6. Thesame transducers and switchablepassive/active crossover networkhave been repackaged in a horizon-tal configuration enclosure. All of thefeatures of the standard producthave been maintained while addinginstallation flexibility.The CSC2264H is available on abuild-to-order basis. Contact theCustom Shop for information onavailability and lead time.1Rating based on test signal of IEC filtered random noisewith a peak-to-average ratio of 6 dB, two hours duration.2Sensitivity is based on a swept 500 Hz to 2.5 kHz test sig-nal for an input of 2.83V @ 8 ohms.JBL continually engages in research related to productimprovement. Some materials, production methods anddesign refinements are introduced into existing productswithout notice as a routine expression of that philosophy.For this reason, any current JBL product may differ in somerespect from its published description, but will always equalor exceed the original design specifications unless other-wise stated.11/19/01 ATRSpecifications:System:Frequency Range (-10 dB): 37 Hz - 20 kHzFrequency Response (±3 dB): 60 Hz - 18 kHzHorizontal Coverage Angle (-6 dB): 80° averaged 500 Hz to 16 kHzVertical Coverage Angle (-6 dB): 70° averaged 500 Hz to 16 kHzDirectivity Factor (Q): 14 averaged 500 Hz to 16 kHzDirectivity Index (DI): 10.5 dB averaged 500 Hz to 16 kHzSensitivity 2 : 95 dB SPL, 1W @ 1m (3.3 ft)Calculated Maximum SPL 2 : 129 dB SPL, 1W @ 1m (3.3 ft)Nominal Impedance: 8 ohms (Passive crossover mode)Power Rating 1 : 600 watts IEC, 2400 watts peakTransducers:Low Frequency: 2206H, 300 mm (12 in) dia., 100 mm (4 in) edgewound ribbon voice coilNominal Impedance: 8 OhmsPower Rating: 600 watts AES, 2400 watts peakSensitivity 2 : 95 dB SPL, 1W @ 1m (3.3 ft)Calculated Maximum SPL 2 : 129 dB SPL, 1W @ 1m (3.3 ft)High Frequency: 2447J; 100 mm (4”) diaphragm and voicecoildia., 76 mm (1.5”) throat dia.; 2333 hornNominal Impedance: 16 OhmsInput Power Rating: 75 W AES; 300 W PeakSensitivity 2 : 112 dB, 1 W @ 1 m (3.3’)Calculated Maximum SPL: 137 dB @ 1 m (3.3’)Physical:Enclosure: Trapezoidal, 15 o top & bottom angles, 18 mmbirch plywoodEnvironmental Specifications: Mil-Std 810, IPX4 per IEC 529Suspension Attachment: 12 points, accept M10 threaded hardwareFinish: Black DuraFlex coating(white or custom color optional)Grille: Black powder coated 18 gaugeperforated steel grille with foam backing (white orcustom color optional)Input Connector: 2 x NL4 Neutrik Speakon connectorDimensions (H x W x D): 394 mm x 711 mm x 378 mm(15.5 in x 28 in x 14.88 in)Net Weight: 31.8 kg (70 lb)RearTop/BottomFront2815.5Sides14.8830°Custom ShopPre-EngineeredLoudspeaker Systems

/ 1

Related manuals for JBL CSC2264H