JBL Control 30 Specification Sheet

Also see for Control 30: Owner's guide Owner's guide Owner's guide Brochure

Contents

key features

JBL Control 30 Specification Sheet Manual pdf 1 page image

Key Features: Extended bandwidth, extremely smoothfrequency response. Fully outdoor-capable design, featuringWeatherMax™ multi-layer grille. 120° x 110° HF coverage. 150 Watt transformer for 70V or 100Vlines, with 4Ω thru. SonicGuard® overload protection. 250 mm (10 in) fiberglass/Kevlar® cone LFwoofer, with neodymium magnet coaxial125 mm (5 in) anodized aluminum coneMR, and 25 mm (1 in) titanium diaphragmcompression driver. Includes InvisiBall® mounting hardware,plus ten 6 mm attachment points for sus-pension and optional U-bracket. Sealed input panel cover and screw-downinput terminals.ApplicationsThe Control 30 utilizes high power compo-nents, computer optimized horn and coaxialcomponent design, patent-pending cabinet manu-facturing techniques, and a complex network toachieve smooth high fidelity performance,extended bandwidth and well-controlled, definedcoverage from a compact loudspeaker.A symmetrical mid-high frequency horn allowsuse of the speaker in either vertical or horizontalorientation. Smooth frequency response andcone-midrange performance ensures excellentsound character throughout the frequency band,over the entire listening area.The top-quality line distribution transformer,designed for minimal insertion loss and reducedsaturation, allows use of either 70V or 100V dis-tributed speaker lines. In bypass position, the8 ohm impedance allows use of multiple speak-ers on a loudspeaker line.The included InvisiBall mounting method issimple to install, aims easily and provides a highdegree of theft deterrence. InvisiBall allows hori-zontal rotation of up to 41° off-axis and verticalrotation of up to 36° (horn end inward) or 23°(woofer end inward). Attachment points for theoptional MTC-30UB (-WH) U-bracket allows forcompact installation and is particularly useful forlow profile underbalcony applications.Weather resistance has been maximized. Theneodymium magnet LF woofer has a fiberglassand Kevlar composite cone, the surround is purebutyl rubber, and the basket is rear loaded tominimize exposure. The MR cone of the coaxialmid-high driver is anodized aluminum with a for-mulation EPDM rubber surround, and the HFcompression driver’s diaphragm is pure titanium.The coaxial component is protected by anacoustically transparent screen. The grille is ther-moset composite coated and stands up very wellto UV as well as humidity. The grille is backedwith our WeatherMax multi-layer foam, whichprevents the direct incursion of water. Nickel/zincrust-resistant terminals ensure a secure input con-nection. An MTC-PC2 sealed-entrance cover isincluded to further protect the speaker’s termi-nals.JBL’s exclusive SonicGuard overload protectionis virtually inaudible to the listener, ensuring reli-ability while providing full fidelity sound.Available in black or white (-WH), the cabinetwill accept a variety of paints to match anydécor.Specifications:Frequency Range (-10 dB) 1 : 38 Hz – 17 kHzFrequency Response (± 3 dB) 1 : 40 Hz – 16 kHz100 Hr Power Capacity2 : 500 Watts Continuous Program Power250 Watts Continuous IEC Pink NoiseMaximum SPL @ 1m3 : Short-Term: 123 dB; Long-Term: 117 dBNominal Sensitivity4 : 93 dB, 2.83V @ 1m (3.3 ft)Nominal Coverage Angle5 : 120° H x 110° VDirectivity Factor (Q): 5.2, averaged 500 Hz to 10 kHzDirectivity Index (DI): 7.1 dB, averaged 500 Hz to 10 kHzNominal Impedance: 4 ohmsCrossover Type: 3rd order Low Pass LF, 2nd order High Pass/3rd order Low Pass MF,3rd order High Pass, HF, plus conjugate shaping circuitry.Transformer Taps: 70V: 150W, 75W, 38W, 19W100V: 150W, 75W, 38WThru Position: 4Ω nominalRecommended High-Pass: See ChartTransducers:Low Frequency: 250 mm (10 in) fiberglass/Kevlar® cone with pure butyl rubber sur-round, 50 mm (2 in) voice coil on fiberglass former, neodymium magnetMid Frequency: 125 mm (5 in) anodized aluminum cone with EPDM rubber(Terpolymer of Ethylene and Propylene) surround, 25 mm (1 in)voice coil on fiberglass formerHigh Frequency: 25 mm (1 in) compression driver, pure titanium diaphragm withpatented JBL diamond surroundPhysical:Enclosure Material: High Impact PolyStyrene (HIPS) with 10% glass fill plus patent-pending internal 5 mm foamed polyurethane secondary moldGrille: Thermoset composite coated steel, WeatherMax multi-layer foamOverload Protection: SonicGuard full range power limiting to protect network and trans-ducers.Environmental: IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray,temperature & UV. Passes Mil-Std-202F for salt spray.Termination: Screw-down terminal strip, zinc plated copper base, nickel platedmetal screws/washers. Accepts up to 9 mm outside 4 mm inside openlug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2 ).Safety Agency Rating: Transformer is listed per UL1876Colors: Black or white (-WH)Dimensions (H x W x D): 593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in)Weight (ea): 18.9 kg (42 lb)Shipping Weight (ea): 20.3 kg (45 lb)Included Accessories: 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x305 mm InvisiBall Hex wrench.Optional Accessories: MTC-30CM (-WH) to install speaker down from the ceiling.MTC-30UB (-WH) U-Bracket1In Half Space2Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. ContinuousProgram Power is defined as 3 dB above the Continuous Pink Noise Rating and is a conservative expression of the system’sability to handle normal speech and music program material.3Calculated from sensitivity and power handling, exclusive of power compression.4Half-space, averaged 100 Hz to 10 kHz5500 Hz to 10 kHzJBL continually engages in research related to product improvement. Changes introduced into existing products without noticeare an expression of that philosophy.Professional SeriesControl®30 Three-Way High OutputIndoor/Outdoor Monitor Speaker

/ 4

Related manuals for JBL Control 30