JBL EON15-G2 Technical Manual

Also see for EON15 G2: User guide User guide User guide Specifications User guide

JBL EON15-G2 Technical Manual Manual pdf 1 page image

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.JBL EON15-G2 REV NPACKAGE WIRING DIAGRAM10-03Technical ManualJBL EON15-G2SPECIFICATIONSACOUSTIC & ELECTRICAL SPECIFICATIONS:• Power Capacity: 300 Watts @ Low FrequencyDriver Impedance.100 Watts @ High FrequencyDriver Impedance• Frequency Range: 39 Hz – 18 kHz (± 10dB)• Sensitivity: 129 dB SPL, 1 Watt @ 1 Meter• Crossover Frequency: 1.5 kHzSYSTEM COMPONENTS:• Low Frequency Integral Frame with one 15” (380 mm)Transducer: Driver, Dual Neodymium Magnet, 2”Differential-Drive Voice Coil• DC Resistance: 1.4 ohm ±10%• High Frequency JBL 2418H-1 1” (Throat Dia.)Transducer: Compression Driver with 1.75 Dia.Titanium Diaphragm. Ferro-fluid Cooled.• DC Resistance: 3.7 ohm ±10%• Input 1 Sensitivity: -44 dBu to -22 dBu for Rated Output(Mic/Line Switch in Mic Position)-12 dBu to +20 dBu for Rated Output(Mic/Line Switch in Line Position)SYSTEM COMPONENTS:(CONT’D)• Input 2 & 3 Sensitivity: -18 dBu to +20 dBu for Rated Output• Output Level: +20 dBu (peak), Loop/Mix Switch inMIX position.• Audio Connectors: Input 1: XLR/F BalancedInput 2 & 3: 1/4” Phone, Balanced(TRS)AURAL SWEEP TEST SPECIFICATIONS:A. System Aural Sweep Test: 200mv input RMS, pot at 1/2, toneflat.B. L.F. Aural Sweep Test: 4.0V Input, 20 Hz to 4 kHzC. H.F. Aural Sweep Test: 3.5V Input, 500 Hz to 20 kHzPHYSICAL SPECIFICATIONS:• Enclosure Dimensions: 686mm x 430mm x 444mm D(27.0 x 17.0 x 17.5 in. D)• Shipping Weight: 46 lbs. (21 kg.)WARRANTY INFORMATION:• Refer to Warranty Statement packed with each product.Warranty 59660Owners Manual981-00059-00Carton990-00213-00Bag32259-001Bottom Tray991-00051-00Filler991-00050-00SLV, W/MICCUTOUTEON 15’SCord, ACLine 120V425-00000-00Use 321101-001NetworkSeaker, High Freq2418H-1Diaph ReplD8R2418-1(SEE SCHEMATIC PAGES)EON15-G2LFCone ReplC2REON15P-2WHTREDBLUEBLK