How do I pair my Jabra earbuds with my mobile device?Jabra Elite Active 65t - Copper BlueTo pair with your mobile device for the first time, follow these steps.1. Turn on the Bluetooth setting on your mobile device.2. When you unpack your Jabra earbuds from the box, turn them on bypressing and holding the Multi-function button on the right earbud (1second) until the LED flashes green.The earbuds enter pairing mode automatically.3. Go to the Bluetooth menu on your mobile device and select the Jabraearbuds to complete the pairing. Alternatively, wear the earbuds tohear the voice guided instructions.Enter “0000” (four zeros) if you are asked for a PIN.If pairing is successful, your earbuds will appear in the list of connectedBluetooth devices on your mobile device. The Bluetooth connection willalso be announced in the earbuds.To re-pair with your mobile device or pair with an additional mobiledevice, follow these steps.1. Turn on the Bluetooth setting on your mobile device.2. Start with the right earbud turned off and in your hand (not in thecharging case). To turn off the right earbud, press and hold (5 seconds)the Multi-function button, until the LED flashes red.3. To enter pairing mode, press and hold (5 seconds) the Multi-functionbutton until the LED flashes blue.4. To pair, go to the Bluetooth menu on your mobile device and select theJabra product from the list. Alternatively, wear the earbuds to hear thevoice guided instructions.Enter “0000” (four zeros) if you are asked for a PIN.When you take the left earbud out of the charging case, it will connectautomatically with the right earbud. If the left earbud is turned off,06/04/2021 02:25https://www.jabra.in/supportpages/jabra-elite-active-65t/100-99010000-40/faq/8ec1bcdc-9b43-465e-b2c8-1faac22ef6f8Page 1 of 2