GN 6210 TroubleshootingGN 6210 - Bluetooth® Wireless Headset for use in theoffice, at home or even on the moveUSE WITH MOBILE PHONES AND PAIRINGDoes the GN 6210 work the same way with all Bluetooth-enabledmobile phones?Mobile phones are produced by many manufacturers and come in a very widerange of makes and models. While the GN 6210 is compatible with them, theremay be slight variances with setting up and using your GN 6210 with yourspecific mobile phone. For example, procedures for pairing your headset toyour mobile phone and the pairing profile used by your mobile can varydepending on the mobile phone type.On some mobile phones, you may have to delete former unused pairings inorder to pair with the GN 6210.See the GN 6210 Pairing Guide for mobile phone-specific pairing instructions,which is posted at www.gnnetcom.com/gn6210/support/.Pairing my GN 6210 with my mobile phone was unsuccessful, whatshould I do?If your headset doesn’t work with or works poorly with your mobile phone,delete any existing GN 6210 pairing and check the compatibility chart from thePairing Guide, which is posted at www.gnnetcom.com/gn6210/support/.When pairing the headset to a mobile phone, remember to either disconnectthe power supply to the base unit or ensure the headset is at least 10 m (30ft.) away from the base.My headset’s pairing to the base has been lost or doesn’t seem to workproperly, what should I do?You may need to reset both your base unit and headset. To reset your base,use a pointed object (such as an unfolded paperclip) to press the base’s resetbutton (on bottom of base unit) for 2 seconds. To reset the headset, press andhold the headset’s volume down button and then simultaneously press theheadset’s Multifunction button down for 5 seconds.To use my headset at home as well as in the office, can I pair myheadset to several bases?Yes, you can use the same headset on up to 2 base units. For example, youmay have one base unit at the office and another at home.