Jabra GN9330e - USB - Headset Setup Manual

Also see for GN9330e - USB - Headset: Guide for basic set-up and use User manual User manual User manual Specifications

Jabra GN9330e - USB - Headset Setup Manual Manual pdf 1 page image

Set-Up GuideGN9330eWelcome to Microsoft Office Communicator!Using this headset with Office Communicator will provide a simple, more consistent audio experience than using the microphone and speakers on yourcomputer (if available). You can also use this headset to answer calls on your Deskphone.Setup Instructions:1. Connect the power cable to the base and to a poweroutlet.2. Connect the USB cable to the base and to a USB porton your PC.3. Connect the two halves of the headset together (A).4. Connect the headset to the base and allow to fullycharge. 4 green LED’s on the front of the base willlight up from left to right as the headset charges.The headset is fully charged when all 4 LED’s are lit(B) (this will take about 3 hours).5. Open Communicator 2007.6. Click the drop down arrow on the upper left corner.7. Select the Tools option.8. Select “Set Up Audio and Video…”9. On the first pane you will set the Handset or Headsetyou want to use. Make sure that Headset (GN9330)is selected in the drop down menu. Then click Next.10. Make sure the Headset (GN9330) is listed as yourspeaker and microphone in the appropriate boxes.(See graphic at right) You may need to set the topdrop down menu to Custom in order to changethese settings. Then click Next.11 On this pane, you will set the audio output locationfor your program sounds. It is recommended thatyou use your PC speakers for this setting if you havea sound card and speakers available.12. When you have selected the output location,click the Finish button.TIP: The GN9330’s microphone can bemuted by pressing in on the volumerocker on the headset. A red LED willbe lit on the base while themicrophone is muted (C).AHeadset (GN9330e)Microphone (GN9330e)

/ 2

Related manuals for Jabra GN9330e - USB - Headset