Jabra Pro 920 Resetting Manual
Also see for PRO 920: Installation notesOverviewDatasheetUser manualQuick start guide
  |
Jabra Pro 920 reset instructions1) Disconnect the power cord to the Pro unit2) Take the headset and press & hold the black circle in the silver circle until the white light onthe headset flashes rapidly, then release immediately. You should now see no lights on the headsetas it should be completely turned off.3) Put the headset back on the base4) Plug the power back into the base5) Wait until you have a green battery light on the base before trying the headset.If the reset is successful and you have an EHS cable (for remote answering from the headset) you’lllikely need to reprogramme the headset to remind it of this…1. Put the headset on your head.2. Get the headset in ‘set up mode’ by pressing the up and down volume controls together until youhear the headset say SETUP.3. Press and release (ie a quick press) the circle button on the headset until you hear ‘REMOTE CALLCONTROL’. |
Related manuals for Jabra PRO 920
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine