Jabra Pro Duo 9465 Instructions Manual

Jabra Pro Duo 9465 Instructions Manual Manual pdf 1 page image

Jabra Pro 9465 DuoHow do I connect my headset with a Polycom IP 320, IP 321, IP330, IP 331, IP 335, IP 430, IP 450, IP 550, IP 560, IP 650, IP 670or VVX series so I can answer and end calls electronically?Requirements:Jabra Pro 9460, Jabra Pro 9465, Jabra Pro 9470, Jabra Go 6470, or JabraMotion Office with the latest firmware installedJabra Link 14201-17Jabra 8800-00-75 (for Polycom IP 320, IP 321, IP 330, or IP 331)Used in combination with one of the following Polycom desk phones:SoundPoint IP phones running: SIP software v 3.0 or later, andBootROM 4.1.0 or laterPolycom IP 321, IP 331 running: SIP software v 3.1.2 rev. C or laterPolycom IP335 running: SIP software v 3.1.2 rev. B or laterVVX series running: SIP software v 3.1.2 rev. B or later, and BootROM4.1.2 or laterTo connect your headset with your desk phone, use the following steps:1. Plug one end of the EHS adapter into the serial port on the back ofyour phone.2. Plug the other end into the Jabra base socket marked AUX.3. Connect the RJ-9 connector of the headset to the Jabra base markedwith a phone icon, and connect the other end to the back of the phonemarked with a headset icon (use cord Jabra 8800-00-75 for SoundPointIP phone models 320, 321, 330 or 331).12/09/2022 23:52https://www.apac.jabra.com/supportpages/jabra-pro-9465/9465-29-804-102/faq/b02403c2-78e3-4285-87b9-0787e57ad3f3Page 1 of 9