James WEDGE Series Installation Manual
  |
INSTALLATION GUIDE®Installation guide for James Wedge Series SpeakerTake the bracket off of the back of the speakerby using your hand, and pulling one side of thebracket out.13 If the wires are in the wall, then run it throughthe bottom slots on the bracket (top photo).If the wire is in the ceiling, then run the wirethrough the top slots of the bracket (bottomphoto).Next, determine if your wires are located in theceiling or the wall.2If the speaker is being installed flush with the walland ceiling, then install all nine screws to securethe bracket.4Now connect your wires to the speaker. (Red tored, and black to black)65 The bracket can also be secured to a wallusing just six wall screws.WEDGE SERIES INSTALLATION GUIDE |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine