H0342700 Rev AAquaPure ® EiTMSeriesReplacement Kitsfor Models APURE35/35CThese instructions are to be used with the following Jandy Replacement Parts:R0512100 -- R-Kit, Power PCB AssemblyR0512300 -- R-Kit, Control PCB AssemblyR0512400 -- R-Kit, Controller Cover AssemblyR0512500 -- R-Kit, Output Cable Assembly1. IntroductionThis document gives instructions for replacingvarious components on the Jandy AquaPure Ei chlorinegenerating device.The instructions were written with safety as thepriority and must be followed exactly. Not following thewritten procedure or taking shortcuts may increase therisk of personal injury. Read through the instructionscompletely before starting the procedure.Before starting the procedure, use the parts list atthe back of these instructions to identify the parts thatare in your kit. If any parts are missing from the kitplease call your local Jandy distributor for assistance.For technical assistance, please contact our TechnicalSupport Department at 1.800.822.7933.2. Ordering InformationTo order or purchase parts for the Jandy AquaPureEi chlorine generating device, contact your nearestJandy dealer or distributor. If they cannot supply youwith what you need, call Zodiac Pool Systems, Inc. at1.800.822.7933. In Canada call Zodiac Pool SystemsCanada, Inc. Customer Support Department at1.888.647.4004.WARNINGFOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensedand qualified in pool equipment by the jurisdiction in which the product will be installed wheresuch state or local requirements exists. In the event no such state or local requirement exists,the installer or maintainer must be a professional with sufficient experience in pool equipmentinstallation and maintenance so that all of the instructions in this manual can be followedexactly. Before installing this product, read and follow all warning notices and instructions thataccompany this product. Failure to follow warning notices and instructions may result in propertydamage, personal injury, or death. Improper installation and/or operation will void the warranty.Improper installation and/or operation can create unwanted electrical hazard which can causeserious injury, property damage, or death.