Javad JLink LTE How To Set Up

Also see for JLink LTE: User manual How to set up User manual

Javad JLink LTE How To Set Up Manual pdf 1 page image

How to setup JLink LTE to provide RTK data received via NTRIPClient to UHF.The purpose of this document is to describe how to configure JLink LTE to provide RTK data receivedvia NTRIP Client to UHF.The following are the steps of configuration of JLink LTE: Connect to JLink LTE via web interface (For more detail see document “JLink LTE UserManual”). Cellular (GSM ) configuration◦ In the Communication/GSM tab. Set the PIN code and APN parameters (if necessary) (seePicture 1).◦ Please use tweezers to install or remove micro SIM card see (see Picture 2.a).◦ Insert the SIM card to its slot. The first slot from the green top cover is for micro SIM, thesecond slot is for micro SD (see Picture 2.b).◦ In the Communication/Power Management tab activate the GSM interface (see Picture 3).And wait for registering in the network and Internet access availability . Detailed connectionstatus you can check in Status/GSM tab (see Picture 4).It is possible also to connect JLink LTE to Internet via LAN or Wi-Fi using any Wi-Fi router, MiFidevice or even smart-phone configured in hot spot mode.Picture 1. JLi nk LTE GSM c onf i gur at i on ta b