Jet BD-920W Operating Instructions Manual

Also see for BD-920W: Brochure Brochure Operating instructions and parts manual

Contents

Jet BD-920W Operating Instructions Manual Manual pdf 1 page image

3GB - ENGLISHOperating InstructionsDear Customer,Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has beenprepared for the owner and operators of a JET BD-920W metal lathe to promote safety during installation, operation andmaintenance procedures. Please read and understand the information contained in these operating instructions and theaccompanying documents. To obtain maximum life and efficiency from your machine, and to use the machine safely, read thismanual thoroughly and follow instructions carefully.…Table of Contents1. Declaration of conformity2. Warranty3. SafetyAuthorized useGeneral safety notesRemaining hazards4. Machine specificationsTechnical dataNoise emissionContents of delivery5. Transport and start upTransport and installationAssemblyMains connectionStarting operation6. Machine operationControlsChuckingTool setupSpindle speed selectionManual turningTurning with auto feedThread cuttingDrilling operation7. Setup and adjustmentsChange gear setupTurning between centresTaper turning with tailstockTaper turning with top slideThree jaw universal chuckFour jaw independent chuckLive centreSteady and follow rest8. Maintenance and inspectionLubrication scheduleBearing adjustmentCross and top slide adjustmentCross slide spindle adjustmentTop slide spindle adjustmentSpindle end float adj.Halve nut adjustmentShear pin replacement9. Trouble shooting10. Environmental protection11. Available accessories1. Declaration of conformityOn our own responsibility we herebydeclare that this product complieswith the regulations* listed on page2. Designed in consideration withthe standards**.2. WarrantyThe Seller guarantees that thesupplied product is free frommaterial defects and manufacturingfaults. This warranty does not coverany defects which are caused, eitherdirectly or indirectly, by incorrectuse, carelessness, accidentaldamage, repair, inadequatemaintenance or cleaning and normalwear and tear.Guarantee and/or warranty claimsmust be made within twelve monthsfrom the date of purchase (date ofinvoice). Any further claims shall beexcluded.This warranty includes all guaranteeobligations of the Seller andreplaces all previous declarationsand agreements concerningwarranties.The warranty period is valid for eighthours of daily use. If this isexceeded, the warranty period shallbe reduced in proportion to theexcess use, but to no less than threemonths.Returning rejected goods requiresthe prior express consent of theSeller and is at the Buyer’s risk andexpense.Further warranty details can befound in the General Terms andConditions (GTC). The GTC can beviewed at www.jettools.com or canbe sent by post upon request.The Seller reserves the right tomake changes to the product andaccessories at any time.3. Safety3.1 Authorized useThis metal lathe is designed forturning and drilling machinablemetal and plastic materials only.Machining of other materials is notpermitted and may be carried out inspecific cases only after consultingwith the manufacturer.Never cut magnesium-high danger to fire!The workpiece must allow to safelybe loaded and clamped.The proper use also includescompliance with the operating andmaintenance instructions given inthis manual.The machine must be operated onlyby persons familiar with its operationand maintenance and who arefamiliar with its hazards.The required minimum age must beobserved.The machine must only be used in atechnically perfect condition.When working on the machine, allsafety mechanisms and covers mustbe mounted.In addition to the safetyrequirements contained in theseoperating instructions and yourcountry’s applicable regulations, youshould observe the generallyrecognized technical rulesconcerning the operation ofmetalworking machines.Any other use exceedsauthorization.In the event of unauthorized use ofthe machine, the manufacturerrenounces all liability and theresponsibility is transferredexclusively to the operator.