QUICKSTART5.965-278.0 01/14Intensive deep cleaner Extra RM 752 ASFRemoval of care films WARNINGThese are only brief instructions! Please read the product information and observe the safety information on theproduct label prior to using the detergent. Follow the dosing instructions on the product label.The non-compliance with the safety information can cause damage to the object to be cleaned and risksfor the environment, the user and other persons.Preparation1 A B C A Determine coating (e.g. paper clip test).Use the intensive deep cleaner on coatingsinsensitive to alkali (e.g. PVC / PUR) only.B Select and prepare the machine and acces-sory that is suitable for the floor covering.C Dose the deep cleaner according to the thick-ness of the care film to be removed(approx. 20-30%, max. 50%).Removing the care film2 A B C A Apply deep cleaner solution, do notvacuum off.B Allow deep cleaner solution to reactaccording to the thickness of the care filmto be removed (approx. 5-10 minutes).C Mechanically treat the floor covering afterthe reaction time, then vacuum off the dirt.Removing residues3 A B C A Thoroughly post-clean the floor coveringwith clear water until all detergent and dirtresidues are removed.B Check pH-value. Repeat the post-cleaninguntil a pH-value of 7-8.5 is reached.C Prior to a new coating, the floor covering mustbe dry and free of dust. CAUTIONRisk of damage due to detergent! Carefully cleanaccessories, work materials and machines afterworking.