INSTALLATION INSTRUCTIONS FOR THE WATERPROOF MANUAL CALL POINT MODELS WCP1A....InstallationThe integral back box has three20mm diameter threaded holes.Two hole stoppers are providedfor use as required. The cableentry holes of the back box mustnot be subjected to stress by thecable or conduit. The use ofsealant such as Loctite product5331 is recommended.WiringConnection to the WCP is madevia the 4 way terminal connectoras shown overleafEach terminal will accommodate aconductor of 2.5mm2.EarthingAn Earth Continuity Terminal issituated in the rear of the backbox. This is designed toaccommodate 2 conductors of upto 2.5mm2.An earthing plate is provided forcontinuity of metal conduits. Thismust be placed behind the backbox prior to fixing the box to thewall.132431265TO TEST TO REPLACE GLASS / RESETTABLE ELEMENT TO RESET123Important Notes; -Please do not over tighten fixing screws.The use of lubricants, cleaning solvents or petroleum based products should be avoided.The O-ring should be replaced when refitting or replacing the Waterproof Cover.KAC ALARM COMPANY LIMITED, KAC House, Thornhill Road, Redditch, Worcestershire, England. B98 9ND. T. +44 (0) 1527 406655 F. +44 (0) 1527 406677 E. technical@kac.co.uk W. www.kac.co.uk