KERN & Sohn GmbHZiegelei 1D-72336 BalingenE-Mail: info@kern-sohn.comTel: +49-[0]7433- 9933-0Fax: +49-[0]7433-9933-149Internet: www.kern-sohn.comBetriebs- und Installationsanleitung AnzeigegerätOperating and Installation Instructions Display unitInstructions d’utilisation et d’installation Appareil d’affichageKERN KXS-TM / KXG-TMTyp KXS-TNM / KXG-TNMVersion 3.22019-09KXS / KXG-TM-BA_IA-def-1932

KERN KXS-TM Operating And Installation Instructions

Technical data

Appliance overview

Keyboard overview

Models KXG-TM

Overview of display

Basic Information (General)

Monitoring of Test Resources

Unpacking and placing

Transport Securing

Adjustment

Basic Operation

Switch-over weighing unit

Numerical input of tare (PRE-TARE)

KXS/KXG-TM-BA_IA-e

Totalization

Indicator settings (menu block "01 FnC")

Backlighting of the display (function "FnC 01")

Automatic power cut "Auto power off (function „FnC 02")

Weighing with tolerance range (function "FnC 03 „)

Resetting to factory settings (function "FnC 04 „)

Automatic zero-adjusting/ stability and response settings (function "FnC 05")

Data Hold functions (function "FnC 06")

Animal weighing function

Automatic reference optimisation with the unit count (function „FnC 07")

Automatic storage of zero point (function "FnC 10")

Function of the F-key (function „FnC 12")

Auto Zero

Settings RS 232 (menu block "03 rS1")

Baud rate (function "rS1 01")

Parity (function "rS1 02")

Output format (function "rS1 03")

Output format (function „rS1 04")

Continuous output rate (function „rS1 05")

Automatic data output with zero display (function "rS1 06")

Condition for data output (function "rS1 08")

digit data format (function "rS1 09")

Set the date/ time (function "rS1 10")

Instruction mode

Data output format

Bluetooth (Factory option)

Servicing, maintenance, disposal

Instant help

Installation display appliance/ load cell

Attach the load cell

Attach RS232

Service menu

19.1 Configure weighing system / menu block

Unverified weighing systems (function „CSP 01")

Verified balancing systems (function "CSP 02")

Set the buffeting point (function „CSP 03")

19.2 Linearization/ menu block

19.3 Adjustment of "verified weighing systems / menu block

19.4 Amend the local gravitation zone/ menu block

19.5 Appliance settings/ menu block

conditions" (function „CFn 01")

Amend the DATA Hold function of verified weighing system (function „CFn 05")

Declaration of Conformity

KXG-TM

Dimensions

Connections

Overview display icons

Not verifiable weighing systems

Linearization

Verification

KXS_KXG-TM-BA_IA-e

Switch-over weighing unit (only not verifiable weighing systems)

Weighing with tare

Display gross / net

General functions

Display background illumination

Operation Modes

Manual totalizing

Automatic adding-up

Data-Hold functions

Weighing with tolerance range

Tolerance check for target weight

Tolerance check for target quantity

RS 485 – pin allocation

Pin allocation

Printer operation / sample logs

Output log (continuous output)

Installing display unit / weighing bridge

How to connect the platform

Configure display unit

Configuration example single range scale

Configuration example dual range scale

KXS-TM

KXG-TNM

KXS-TNM