KI 700 Series Assembly Instructions Manual

Also see for 700 Series: Assembly instructions Assembly instructions Assembly instructions Assembly instructions

KI 700 Series Assembly Instructions Manual Manual pdf 1 page image

Assembly InstructionsKI 700 Series Desk ReturnAugust 1997Key HoleDownHangerScrew WorksurfaceDetail ADetail BDesk EndPanelWire ManagementChannelWorksurface31254Tools Requiredü Phillips Screwdriverü 3/8” Socket/WrenchHardware Parts List(9) #20162 - #8 x 1/2” Screws(6) #20192 - #14 x 7/8” Screws(2) #20201 - #14 x 7/8 Hanger Screws(2) #20425 - Hex GlidesKI PembrokeP.O. Box 5801000 Olympic DrivePembroke, OntarioK8A 6X7TEL (613) 735-5566FAX (613) 735-33331. To avoid scratching worksurface,place top face down on a protectivesurface.2. Insert (2) hanger screws in predrilledholes for end panels. Place endpanel over hanger screws and slideinto position (Detail A).3. Position modesty panel againstend panel aligning holes with thosein end panel, fasten using (2-3)*#8 x 1/2” screws.4. Place wire management channel onworksurface against end panel andmodesty panel, product label facinginward, keeping predrilled holesaligned. Bend tab in end panel overwire management channel (Detail B).Secure wire management channel inplace with (3) #8 x 1/2” screws.5. Screw (2) hex glides in bottom ofend panel. See options on reverse.6. Turn right side up for finalplacement.* (2) - #8 x 1/2” screws - partialmodesty panel(3) - #8 x 1/2” screws - full modestypanelComponents1 - Desk Return2 - Modesty Panel3 - End Panel4 - Wire Management Channel5 - Level or Step Connector

/ 2

Related manuals for KI 700 Series