Kaba Mauer 82132 Mounting Instructions
Also see for 82132: Mounting instructionsMounting instructions
                   |
Revision level 15.02.2016Page 1 of 19Mounting Instructions 82132/33 Code-Combi B with Aluminium Control Unit1 GeneralThese mounting instructions are the basis for the approval by ECBS, VdS, A2P (CNPP)- DNV, UL. Installation of thelock to be performed exclusively in accordance with these instructions.Guidelines of the national certification bodies are to be considered and complied with in addition. Use high quality alkaline/manganese monobloc batteries only. Low quality batteries may cause oxidation which results in afunctional failure of the lock.. Avoid residual crystalline moisture in the cabinet (e.g. from varnishing) to make sure that electrical contact areas are notattacked. Make sure that the ingress of dirt or detergents (e.g. remaining fillers or cold cleaners) is prevented. Do not grease/oil the lock or key. It is recommended, that unauthorized persons have no access to security sensitive parts of the lock, also the door of thesafe, where the lock is installed, is open.2 Mounting instructions for lock and control unit- RH version (standard version):Lock mounting positionBolt LH, keyhole horizontalBolt downwards, keyhole verticalBolt upwards, keyhole vertical- LH versionLock mounting positionBolt RH, keyhole horizontal Any variation of the lock or key may result in functional trouble and must better not be done. All claims under guarantee andwarranty will expire in this case. Lock fastening: Use of M6 steel socket head cap screws or BSW ¼" steel bolts. The length of engagement mustcorrespond to the applicable standards considering the thickness of the lock of 30 mm and the screwing height of the lockcase of 24 mm. Fastening screws: minimum property class 4.8 and maximum property class 8.8. Screws to be secured either by lock washer, flat spring, tooth lock washer, fan type lock washer considering the diameter(d1) or to be cemented. Screw tightening moment : minimum 5 Nm and maximum 6 Nm. The bolt must be floating in installed condition. Perfect function of the lock and of any additional connected or triggered systems (e.g. boltworks) must be warranted andchecked by specialists during installation of the lock. The lock must be mounted in closed condition (bolt extended). |
Related manuals for Kaba Mauer 82132
manualsdatabase
Your AI-powered manual search engine