Keating Of Chicago Cutting Board with Brackets 055523 Installation Instructions Manual

www.keatingofchicago.com 1-800-KEATINGI N S T A L L A T I O N I N S T R U C T I O N SCutbrdInstll6/05INSTALLATION FOR CUTTING BOARDWITH BRACKETS ON KEATING GRIDDLESWhat’s needed tocomplete this installation?• Drill Gun• #19 Drill Bit• Phillips Screw DriverFLUSHFLUSHWhat’s included in your package?A PRE-ASSEMBLED MOUNTING BRACKET FOR SECURING CUTTING BOARD TO SIDE BRACKET (2x)B END SUPPORT BRACKET (2x)C RICHLITE CUTTING BOARD (1x)D #10 SCREWS FOR ATTACHING BRACKET TO CABINET (6x)E CUTTING BOARD CENTER SUPPORT FOR 48" AND LARGER GRIDDLES (1x)1) HOLD END SUPPORT BRACKETS IN PLACE AND MARK 3 HOLES ON EACH SIDEOF CABINET. TOP EDGE OF BRACKET IS TO BE FLUSH WITH UPPER EDGE OFCABINET SIDE. 90° FORM ON THE BRACKET WILL EXTEND OUT FROM THEPERIMETER FRONT.2) DRILL THREE HOLES ON EACH CABINET SIDE WITH THE #19 DRILL BIT.3) ATTACH END SUPPORT BRACKETS WITH #10 SHEET METAL SCREWS PROVIDED.4) SLIDE CUTTING BOARD IN PLACE. EXISTING BRACKETS ON CUTTING BOARDSHOULD MATE WITH FORMED EDGES ON END SUPPORT BRACKETS.5) CUTTING BOARDS 48" AND LONGER ALSO HAVE A CENTER SUPPORT WHICHATTACHES ON THE BOTTOM SIDE OF THE PERIMETER FRONT (UNDER THE"CAUTION HOT" WARNING LABEL) WITH EXISTING 1/4–20 SCREWS.Perimeter FrontPart No. 055523

/ 1

Related manuals for Keating Of Chicago Cutting Board with Brackets 055523