Kendrick DigiFire FX-PRO User Manual
      |
©Kendrick Astro Instruments – DigiFire FX-Pro Dew Controller User Guide 05 FEB 2019 Page 1 of 6Confidential - This is a controlled circulation document. Do not share, in any form, without explicit written permission from Kendrick Astro Instruments.Kendrick DigiFire FX-PRO Temperature Sensing Dew ControllerUser GuideFeatures/Specifications:• OLED Graphic Display:o Voltage Metero Temperature Display (Ambient and Optics)o All settings can be viewed on a single screen.• Operating Voltage: 12V DC (12.6 - 13.8V DC nominal)• 4-Channel Heater Ports: each independently programmable,with 2 ways to control heater output:o Temperature Sensing (Ports 1 & 2)o Duty Cycle (0-100%) for each of 4 heater ports.• User replaceable power cord (we recommend Anderson Power Poles)• Maximum Amperage Output:o Cigarette Lighter (fused) Plug: 7 Amps max.o User supplied plug: Up to 15 Amps• On-Board auto-reset 15 Amp “Poly” Fuse• Reverse Polarity Protection†• Low Voltage Warning (warning @ 11.9V / shut-down @ 11.6V)• Disable Low Voltage Cut-Off… we don‘t recommend it, but if you’re willing to ruin your battery, you can drain it dry if you wish by turning this featureOFF.• Dimmable Lights• Lights (and graphic display) Auto Shut-Off (after 20 seconds) Press a button to turn on lights again. Lights and graphic display can also be programmedto remain ON.• DC Accessory Ports (2):o 1 constant 12V, 7 Amp Maxo 1 adjustable 8V/12V (8V is DSLR battery voltage), 1.5 Amp MaxDC Accessory Port Plug Specs: Switchcraft 760K (threaded locking ring) OD 5.5mm / ID (center pin) 2.5mm / Barrel Length: 9.5mm. NOTE: EarlierDigiFire (8 and 12) models used a different 2.1mm connector.† Reverse Polarity Protection is limited to the main circuit board and variable DC Accessory Port (8V/12V). The Heater Ports and 12V constant DC AccessoryPort is NOT protected (heaters don’t care about polarity)Included with this controller:• Power Cord – 70” (180cm) Cigarette Lighter version with replaceable 7 Amp fuse• 2 Temperature Sensors and 2 each of 6’ (183cm) Sensor Cables: 1 Ambient, 1 Optics (optional 2nd optic sensor also available).Note: The DigiFire FX-Pro comes with 1 Ambient and 1 Optic tensor. A Temperature Sensor for a second optic (telescope) is NOT included, but is anavailable option (SKU: 2001-12-SCBL6).• Velcro adhesive mounting padPhysical Dimensions: (including mounting tabs):• 3.25” X 6.75” X 1.147” (82.5mm X 171mm X 29mm) weight (excluding power cord and sensors: 5.8oz (164 grams)Optional Accessories:• Additional Optics Temperature Sensor (SKU: 2001-12-SCBL6) DSLR Camera Battery Adapter – Available for most Canon and Nikon DSLR models.http://www.kendrickastro.com/powerpanels.html#DSLR• Anderson Power Pole kit with 15Amp Contacts (208-IPP-ACKIT) allows you to convert the power cord cigarette lighter plug.Plug orientation works with Kendrick Power Packs and Power Panels. Otherwise, choose SKU 208-IPP-AC-UF (non-welded).• A spare Power Cord (SKU: 2001-DF812-PWR) |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine