Man-1152_K25800_series_Power_Supply_Manual_05 Page 1 of 18* This denotes variants tested & approved by the LPCBK25800 & KD25800 SeriesFire Alarm Power SuppliesInstallation, Commissioning andOperating ManualMan-1152 Issue 05 July 2016

General

Mounting

Connecting to the mains Input

Connecting to the Outputs

Load Connections (Ribbon Cable)

Load connections (with optional dual transmission path PCB fitted)

Fault output contact connections

DIP switch settings

Indicators

Standby batteries

Power Supply Unit Dimensional Drawings

Temperature Sensor Mounting

Cabling

Kentec Electronics K25800 Series Installation, Commissioning & Operating  Manual

K25800 Series

KD25800 Series


Contents Table Of Contents General Mounting Connecting to the mains Input Connecting to the Outputs Load Connections (Ribbon Cable) Load connections (with optional dual transmission path PCB fitted) Fault output contact connections DIP switch settings Indicators Standby batteries Power Supply Unit Dimensional Drawings Temperature Sensor Mounting Cabling	Man-1152_K25800_series_Power_Supply_Manual_05 Page 1 of 18* This denotes variants tested & approved by the LPCBK25800 & KD25800 SeriesFire Alarm Power SuppliesInstallation, Commissioning andOperating ManualMan-1152 Issue 05 July 2016 Next / 18