Congratulations!The DVT-505 Home Theater System will make watching movies at home more fun than ever. To connect your speakers to thereceiver follow the instructions on this sheet. To learn how to operate your receiver please read and follow the instruction man-ual included in the DVD receiver’s box. If you’re also connecting other equipment, such as a TV, VCR, or other source compo-nent, use the the other side of this Quick-Start Guide in combination with the manuals that came with those components.Placing Your SpeakersPlace the speakers as shown in the diagramto the right. While you’re setting the speak-ers up, keep these points in mind:• If the subwoofer causes discoloration ofthe TV picture, move it away from theTV until the discoloration disappears.• You can hang the surround speakers onthe wall using heavy-duty picture-hangers.• Placing the subwoofer next to a wallyields more deep bass output than plac-ing it away from a wall. Placing the sub-woofer in a corner yields the deepestbass output overall.Connecting Your SpeakersImportant: Do not plug the DVD receiv-er’s power cord into an AC outlet untilyou have properly connected all of thespeakers.Connect the speakers as shown in the main diagram. To make connecting the speakers easier, we have color-coded the speak-er connectors and the terminals on the receiver and speakers.Balancing the SpeakersYour DVT-505 DVD receiver comes with the speaker volume and distance set-tings pre-balanced. If you have positioned the speakers as shown in the diagramyour system will create a spacious surround sound environment right out of thebox with no further adjustment required.If your room is arranged differently than shown in the diagram, or if you simplywant to fine-tune your system’s performance, you can easily change the vol-umes of the individual speakers to get a better balance:1. Select the speaker you want to adjust with the F, C, R, and SW buttons:F = Each press cycles between Left Front and Right FrontC = CenterR = Each press cycles between Left Surround and Right SurroundSW = SubwooferThe display will show the selected speaker and its relative volume level.2. Use the TRIM /MULTI -CONTROL buttons to adjust the selected speaker’s volume.• Do not be concerned with the volume level readout on the display whileyou’re doing the adjusting—this is for reference purposes only. However,once you’ve balanced all the speakers you should write down each speak-er’s volume level setting for reference:For more detailed information about speaker adjustments, see the DVD receiverinstruction manual.Quick Connect Guide Step 1: SpeakersDVT-505 (Video Component Quick-Connect Guide on other side)If you have any questions about your new system, please contact our Customer Service Department at (800) KENWOOD, or visit our Web site at www.kenwoodusa.comLEFTFRONT RIGHTSURROUNDLEFTSURROUNDCENTERRIGHTFRONT SUB-WOOFER