Kenwood KDC-C667 Instruction Manual

Also see for KDC-C667: Instruction manual Instruction manual Service manual

Contents

Kenwood KDC-C667 Instruction Manual Manual pdf 1 page image

KDC-C717KDC-C667COMPACT DISC AUTO CHANGERINSTRUCTION MANUAL©B64-1801-20 (MW)Troubleshooting GuideSpecificationsSpecifications subject to change without notice.Laser diode ..................................................................................................GaAlAs (λ=780 nm)Digital Filter ..............................................................................................8 Time Over SamplingD/A Converter.......................................................................................................................1 bitSpindle speed.............................................................................................500 ~ 200 rpm (CLV)Wow & Flutter......................................................................................Below Measurable LimitFrequency Response (±1 dB)...............................................................................5 Hz ~ 20 kHzTotal harmonic distortion (1 kHz) ...................................................................................0.005 %Signal to Noise Ratio........................................................................................................100 dBDynamic range ...................................................................................................................94 dBChannel separation.............................................................................................................96 dBOperating voltage...........................................................................14.4 V (11 ~ 16 V allowable)Current consumption ................................................................................0.8 A at Rated powerDimensions (W × H × D)(KDC-C717)........................................250 × 80 × 176 mm (9-13/16 × 3-1/8 × 6-13/16 in.)(KDC-C667)........................................250 × 64 × 176 mm (9-13/16 × 2-1/2 × 6-13/16 in.)Weight (KDC-C717) ............................................................................................2.0 kg (4.4 LBs)Weight (KDC-C667) ............................................................................................1.8 kg (4.0 LBs)When removing the CD changer, be sure to first eject a magazine then unplug the changer cord. Donot forget to attach the transport screws before transporting the CD changer.The CD changer may be damaged during transport if a magazine or CD is left inside it or the transportscrews are not attached.PROBLEM POSSIBLE CAUSE SOLUTIONSound skips due to vibra-tion.The disc changer modecannot be selected.• The unit is mounted at a slant.• Changer unit is mounted in anunstable place.• The angle adjustment switchesare set improperly.The O-N selection switch of thedisc changer is not set properly.• Mount the unit so that is level.• Mount the unit in a stable place.• Set the angle adjustmentswitches to the correct posi-tions.Set the O-N selection switch to"O" position.

/ 4

Related manuals for Kenwood KDC-C667