Kenwood VR-2090 Instruction Manual

Also see for KRF-V7771D: Instruction manual Instruction manual Setup Instruction manual Service manual

Kenwood VR-2090 Instruction Manual Manual pdf 1 page image

MeepeeKENWOODAUDIO - VIDEO RECEIVER aVR-2090VR-2080: KRF-V8881 DKRF-V7/7/1DINSTRUCTION MANUALKENWOOD CORPORATIONConneThis manual contains instructions for four models.Model availability and features (functions) may differ depending on country and sales ;area.About the DTS multi-channel audio formatThe DTS multi-channel audio format is available on CD, LD and DVD software. DTS is a strictly| digital format and can not be decoded inside most CD, LD or DVD players. For this reason, if you; attempt to listen to DTS encoded software through the analog output of your new CD, LD or DVDplayer, you will experience digital noise in most cases. This noise can be quite loud if the analogoutput is connected directly to a high power amplification system. Proper measures for playing thedigital output as described below should be taken to avoid this situation. To enjoy DTS DigitalSurround playback, an external 5.1 channel DTS Digital Surround decoder system or an amplifierwith a built-in DTS Digital Surround decoder must be connected to the digital output (S/P DIF, AES/EBU or TosLink) of a CD, LD or DVD player.Important: Set Up the Remote Control FirstTo operate your audio system correctly, it is important to first set up the remote control.The operation modes on your remote enable control over the receiver and other components inyour system. Read and understand the instructions for the remote, especially how to switch |operation modes. |ListetoAudioQuickStartTo enables surround-sound in the shortest amount of time, follow the steps that arehighlighted by a « (star}.B60-3576-00 01 GH) (K, P, M, C, Y)98/12 1110987654