Keysafe C500 Code Change Manual
Also see for C500: User guide
  |
Code Change Guide - C500 KeySafeQuestions? Give us a call on 01905 770 333Before you begin, please rememberYou will need to select your own combination, ideallyfeaturing between 5 and 7 digits and use a combination ofboth numbers and lettersEach number/letter can only be used onceDo not use a combination that can be easily guessedThere is no override or reset code. Make a note of yourcode and store it somewhere safeSetting your combinationPull open the black weather cover.Press down on the CLEAR button (located in the centre ofthe C500) and then release.Enter your existing code and then turn the OPEN dialclockwise 180° to open the lid. The word OPEN will nowbe upside-down.Slide the white plastic instruction card on the lid towards the hinge of the KeySafe andremove. This may reveal a red warning sticker. Please read before removing.Without closing the C500 lid, leaving the KeySafe open, turn the open dial on the front of theC500 counter clockwise 180°, back to the locked position. The word OPEN will now be thecorrect way up. Confirm that the “GREEN” triangle is visible on the locking bolt.There are twelve grey buttons on the back of the lid. Each of these grey buttons correspondsto the black buttons on the front of the C500. These buttons each have small arrows in theshape of a triangle. Arrows pointing away from the hinge are OFF and are not part of thecombination. Arrows pointing towards the hinge are ON and are part of the combination.Important!The locking pin must be in LOCKED position before the code can be changed. Forcing thesetting buttons when in the DOWN position may damage the C500 and void the warranty.Use the white plastic card provided (code change tool) to turn all the grey dials to the OFFposition. This will reset your combination. If you encounter resistance, stop and check tomake sure the locking bolt is LOCKED and the word OPEN is the correct way up on theOPEN dial.Note: Do not use a screwdriver!Test to make sure your KeySafe code has now been reset by turning the OPEN dialclockwise 180°. The OPEN dial should turn freely and the locking bolt should retract withoutentering a code. If the OPEN dial does not turn, then there is still a grey dial set in the ONposition. Make sure all the dials are in the OFF position.Again, without closing the C500 lid, turn the open dial on the front of the C500 counterclockwise 180° back to the locked position. The word OPEN will now be the correct way up.Confirm that the “GREEN” triangle is visible on the locking bolt.To add a number or letter to the code, use the code change tool to turn the grey dial 180°until the button pops back up completely and the arrow points in the ON direction (towardsthe hinge).Once your code is set. Return the red sticker (if there is one) and the white plastic card overthe back of the lid. |
Related manuals for Keysafe C500
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine