N7015A Type-C High Speed Test Fixture KitQuick Start and Accessories GuideN7015A KitStandardContentsOptional Accessories Included in the N7015A Kit if Ordered with the KitN7015A - 016 Option:Type-C Low Speed Signal Access and Control FixtureN7015A - 017 Option:Type-C Receptacle Adapter(2110-0623)Replacement Fuses(Qty. 4)Power Supply PlugConnector(0360-2693)Wrench(8710-2803)Type-C HighSpeed Test Fixture(8121-1242)USB Cable(N7016A)Low Speed Fixture N7017A AdapterOther Keysight Type-C Product(s) for use with N7015A(sold separately)N7018A Type-CTest Controller

Keysight Technologies N7015A Quick Start Manual

safety notices

Introduction to the Type-C Test Fixtures

Usage Scenarios for the Type-C Test Fixtures

How the Type-C Test Fixtures Work Together

Type-C Connectivity Test Kits

N7018A Type-C Test Controller Kit

Compatibility with Oscilloscopes

For More Information

N7015A Type-C High Speed Test Fixture Components

N7015A Channels Identification Rings

N7015A Insertion Loss Plot

Cleaning the N7015A Test Fixture

3 N7018A Type-C Test Controller

Components

Supported ALT Modes

Features

Powering the N7018A and DUT

Setting up the Wire Harness for the External Power Supply

Pre-use Warnings and Connectivity Precautions

Cleaning the N7018A Test Controller

4 N7016A Type-C Low Speed Test Fixture

Introduction

N7016A Block Diagrams

VBUS Control Block Diagram

CC Control Block Diagram

Significance and Values of Rp, Rd, and Ra Termination Resistors in the USB Type-C Connector

Control Setup Block Diagram

Powering the N7016A

Replacing the N7016A Fuse

5 N7017A Type-C Receptacle Adapter

Insertion Loss Plot for N7015A with N7017A

N2787A 3D Probe Positioner

InfiniiMax 1130B Series Probe Amplifier

7 Sample Setups for Type-C Testing

Testing a USB 3.1 Host (Tx)

Testing a DisplayPort (2+2) Source (Tx and AUX Channel Testing)

Testing a DisplayPort (4 lanes) Source (Tx and AUX Channel Testing)

Testing a Thunderbolt 3 Host (Tx)

Testing a USB Power Delivery Consumer over Type-C Interface

Testing a USB Power Delivery Provider with N7018A set to Sink Current

Testing a USB Power Delivery Provider over Type-C Interface

8 Accessing Type-C Signals

Overview

Probing the CC1, CC2, and VBUS Signals

Probing the SBU1 and SBU2 (Secondary Bus) Signals

Probing the D+ and D- Signals

If you are Using N7018A

Establishing Connectivity between the N7018A Hardware and Software GUI

Setting up the N7018A Emulation Role and ALT Mode and Establishing Connection with DUT