Kiramek OB-23 Manual
  |
PRECAUTIONSPLEASE READ THOROUGHLY BEFORE USEPRODUCT WARRANTY CLAIMOB-23OBD 3-Way Splitter6 Months (validated only by dealer and/or dated proof of purchase)Year: , Month: , Day:Name:Address:Phone: Email:Name:Address:Phone: Website:Approval StampManufacturer:Contact TEL:KIRAMEK, Inc.9-183-1 Itayama-cho,Handa-shi, Aichi-Ken 475-0936 JAPAN+81-569-20-5585 ( )Operating Hours (ex. Sat./Sun./Holidays):10:00AM ~ NOON, 1:00PM ~ 4:00PMPRODUCT DESC.:Warranty Period:Date of Purchase*:Customer Info.*:* Please fill in these marked sections above completely.NOTE: Warranty Claims not accepted without validApproval Stamp and/or dated proof of purchase.Seller Info.*:MODEL:Ver. 01152015OBD 3-Way SplitterOB-23 MANUALThank you for purchasing the OB-23 OBD 3-Way Splitter. Please read this manual in itsentirety before using the product. Be sure to store this manual in a safe place, as you mayneed to reference it in the future.After connecting the OB-23 harness and mounting it to the car, take care that it does notcome in contact with the vehicle’s moving parts, especially the brake and acceleratorpedals. Failure to comply with this may result in an electrical short, fire, or vehiclebreakdown that could result in bodily injury and/or property damage.WARNINGDANGER Mishandling may cause bodily harm!• This product was designed for use with our firm’s DIGI-LINK CAN-BUS products. Whenattaching third-party devices to the OB-23, you must ensure those devices will not drawmore electric current than specified by your vehicle’s CAN wiring.• NEVER attempt to modify the harness, as such could result in a short and bodily harm.• Connect the OB-23 only in accordance with this MANUAL.• This product is not waterproof, splash-proof, or dust-proof. Take care to prevent water,dirt, oil and other impurities from entering the product; otherwise malfunction to theproduct could occur, as well as vehicle damage and possible bodily harm.NOTE Product or vehicle failure could result from ignoring the following:• This product is primarily intended for use on Japanese vehicles within Japan.• Our company shall not be held liable for traffic accidents that occur with the OB-23 installed.• Specifications of this product are subject to change without notice.• NEVER exceed the electrical specification of the harness wires and OBD plug whenattaching third party devices to the OB-23.• We do not guarantee that all OBD devices you attach will be compatibile with each other.IMPORTANT• When using the OB-23 in conjuction with other DIGI-LINK products from our firm, takecare not to attach third party devices to the OB-23 which draw excessive current. Suchcould result in large voltage drops that may temporarily impair one or more of theDIGI-LINK devices.• There may be some vehicles in which the factory plastics or upholstery interferes withthe proper mounting of the OBD plug on the OB-23. Carefully examine your car prior topurchase to ensure the OB-23 can be mounted in your car to your satisfaction. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine