La Crosse Technology Weather Radio User Manual
Also see for Wireless Weather Station: FaqsInstruction manualInstruction manualInstruction manualInstruction manual
 |
LA CROSSE TECHNOLOGY QUICK SET-UP INSTRUCTIONSPlease make sure that fresh batteries are installed properly in the receiver and the sensor.IMPORTANT!! Do not set the time or press any other buttons until the display has communicated withthe outdoor sensor for at least 10 minutes.Use the “SET” button toggle through the menu options.Use the “INDOOR” button to change the menu options when they are flashing.1. Press and hold the SET button until 12h is flashing. Use the INDOOR button to select either 12hor 24h time. Press and release the SET button once.2. The TIME is flashing. Use the INDOOR button to adjust the hours and the OUTDOOR button toadjust the minutes. Press and release the SET button once.3. ** NOTE: There is only a PM display on this unit which displays under the time. If there is noPM display, the hours are set to AM**4. The Fahrenheit is flashing. Use the INDOOR button to select either Fahrenheit or Celsius. Pressthe SET button twice to exit the set-up. |
Related manuals for La Crosse Technology Wireless Weather Station
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine