La Gard 3750-K Installation Instructions Manual

Also see for 3750-K: Installation instructions Installation instructions Operating instructions Manual User operating instructions

La Gard 3750-K Installation Instructions Manual Manual pdf 1 page image

© copyright 2006 12-273v2 LA GARD INC - A Member of The Kaba Group3750-K Electronic Entry Device and Deadbolt LockINSTALLATION INSTRUCTIONSThe Quality System of LA GARD Inc. is ISO 9001 certified. In order to maintain this high quality standard and to ensure a problemfree application, please read this guide thoroughly before mounting the LPAUDIT.SAFEGUARDS FOR MOUNTINGLA GARD recommends the following:1 As soon as an electronic lock has been mounted, no more welding can be done on the safe.2 Keep metal dust, filings, etc. away from the lock.3 Never remove lock cover.4 Never oil, grease, lubricate or paint the lock.5 Keep cables away from sharp edges and moving parts.6 Never carry Keypads or Locks by holding on to the cable.7 Use ALKALINE batteries only. (LA GARD recommends Eveready™ or Duracell™)Figure 2 Figure 31 3750-K Entry[Comes with hardware pack that includesmounting screws for entry, pin and spring andbearing plate](The pin and spring are for use with the Dual-Handed Swingbolt Lockonly. DO NOT use them with the Deadbolt or Springbolt style locks.)2 3740-2/3040-DB/6040-DB Deadbolt Lock[Comes with hardware pack that includesmounting screws for lock]Figure 112Deadbolt Dimensional Drawing

/ 3

Related manuals for La Gard 3750-K