La Gard 8130 Installation Instructions Manual
Also see for 8130: Installation instructionsInstallation instructionsManualUser operating instructions
     |
To ensure problem free installation and application, please read these instructions thoroughly before installing the 8130 Entry Deviceand Lock.8130 ENTRY DEVICE PARTS• 8130 Entry Device w/Cable Assembly• Metric Hardware Kit• 2 Position Shunt (Jumper)• M4-0.7 5.5 mm Diam x 5.5 mm Shoulder Screws (2) (for Standard Mounting Method)• M4-0.7 x Phillips Head Screws (2) (for Alternate Mounting Method)• English Hardware Kit• #8-32 .218 Diam x .2 Shoulder Screws (2) (for Standard Mounting Method)LOCK OPTIONSDual-Handed Swing Bolt, Dead Bolt, Spring Bolt or Redundant Mechanical Lockwith one of the following lock codes:ComboGard (33E V2.13)ComboGard Pro (39E V1.01)AuditGard (66E LGA V1.20)TimeGard (TL11 V1.30 and V2.22)Note: Hardware Kit included with lock.OPTIONAL ACCESSORIES• Knob Assembly - P/N 2666 (recommended for use with Dead bolt or Spring bolt locks).• VisionGard Dial Assembly - P/N 2085 (for use with Redundant Mechanical lock). An entire range of LA GARD dials is available foralternate dial options.• Battery or Battery/Alarm Box (recommended if using with Time Delay/TimeLock. Alarm Box is required for use of certain features).• Small box: P/N 2788 or 2789• Large box: P/N 4001 or 4002INSTALLATION INSTRUCTIONS(P/N)738.098 Rev A • 04/09 © copyright 2009 Kaba Mas LLCpage 1 of 581308130Electronic Entry Device with LockThe installation instructions are the basis for Security Agency Approvals. The lock installation must be done in accordance to theseinstructions in order to maintain the labeled approval level.DESIGN PARAMETERS FOR DEAD BOLT LOCKS1. Bolt dimensions (nominal): .312 inches x 1.000 inches/8 x 25.4mm2. Bolt movement (nominal): .465 inches/11.8mm3. Bolt extension: .465 inches/11.8mm4. Maximum load movable by the bolt: 5 lbs. (22N)Note: LA GARD dead bolt locks may not open if more than 5 lbs. (22N) of force is applied to the end or side of the bolt.5. Maximum load against bolt when thrown (all directions): 224.8 lbs. (1kN)6. The lock can be fitted to safes or vault doors of any material.Note: As is the case with all mechanical and electronic locking devices, the container and boltworks must be designed to protectthe lock.2788 Small Battery Box2789 Small Alarm/Battery Box4001 Large Battery Box4002 Large Alarm/Battery Box2666 Knob Assembly(For use with Dead Bolt or Spring Bolt Locks)2085 VisionGard Assembly(For use with RedundantMechanical Locks)Dual-HandedSwing Bolt LockDead bolt Lock orSpring Bolt Lock RedundantMechanical Lock |
Related manuals for La Gard 8130
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine