Labgear LDL206RLP Installations And Specifications

Labgear LDL206RLP Installations And Specifications Manual pdf 1 page image

1COMPLIANTIntroductionThe name Labgear has been associated with qualitysignal distribution since 1932 and the current rangeof amplifiers continues to uphold that tradition.The LDL line powered amps can carry analogueand digital TV and radio, DAB, Freeview, DVB-Tand DVB-T2 HD TV signals and have:• Separate more compact and efficientSwitch-Mode Power Supplies which run cooler• Improved gain flatness delivering a betterbalance across the performance range• Lower noise figure for optimised signal quality• Greater signal handling capacity to cope withmore channels• Better impedance matching and thereforeimproved signal transfer from amp to cable• Labgear amplifiers use F-type coaxialconnectors for better matching and securityThese fully screened 6 and 8 way TV and FM/DAB amplifiers are line powered by the separatePSUFC power unit supplied. This allows the amplifiers to be positioned anywhere in the buildingas long as they are connected with good quality coax cable to the power unit. This makes themideal for installation in lofts where no 13 Amp power supply is available. The amplifiers featureseparate inputs for VHF (Band III TV, FM and DAB digital radio) and UHF (Freeview, DVB-T andDVB-T2 HD digital TV). They also have an IR return path to enable channel changing from remotelocations and are compatible with Labgear and other Digilink remote control systems.This makes them ideal for use in Sky™ digital satellite home installations, where the output froma digibox can be distributed to several rooms with the capability for full remote control of theSky™ box from these rooms. The LDL amplifiers are compliant with the Radio Equipment Directive2014/53/EU and meet harmonised standard EN 303 354 for product Type D Class 0, they are suit-able for digital TV signal distribution of Ch21-60 from a receiver or from an aerial fitted with a 4Gfilter in the UK and EIRE.LDL206RLP & LDL208RLPLine Powered Distribution Amplifiers with IR BypassGeneral Safety PrecautionsTo Prevent OverheatingThe recommended clearances and other precautions given in these instructions must beobserved to prevent overheating. In addition, units should not be positioned where they arelikely to become covered by curtains, fabric or insulating material. The amp should not beleft resting on a carpet.Other precautionsThese appliances are not waterproof, they are intended for indoor use only and must not bepositioned where they could be exposed to dripping or splashing water. Objects containingliquids should not be placed on or near the amplifier.To prevent fire, make sure the unit and attached cabling is installed well away fromnaked flames.Mains PlugYour amplifier is supplied with a standard mains plug already fitted, if you need to changethe plug use a competent professional (ELECSA or NICEIC) to make the connection.If you need to change the fuse use a 3 Amp fuse to BS1362 carrying the ASTA or BSIapproved mark and refit the plastic fuse carrier.

/ 4

Related manuals for Labgear LDL206RLP