Lacrosse WS9032 Instruction Manual

Lacrosse WS9032 Instruction Manual Manual pdf 1 page image

StandLCD DisplayFunction keysWEATHER STATIONInstruction ManualINTRODUCTION:Congratulations on purchasing this state-of-the-art weather station as an example of innovativedesign and quality piece of engineering. Providing radio controlled time, date, calendar, Moonphase, indoor and outdoor temperature, indoor and outdoor relative humidity, and air pressurehistory information. This unit will never keep you guessing on current and future weather conditions.Operation of this product is simple and straightforward. By reading this operating manual, the userwill receive a better understanding of the Weather Station together with the optimum benefit of all itsfeatures.FEATURES:The Weather Station• DCF Radio controlled time with manual setting option• Time reception ON/OFF (user selectable)• 12/24 hour time display• Time zone option ±12 hours• Weekday and day calendar display (year and month only in setting mode)• Alarm setting with snooze function• Display 12 Moon phases throughout the year• Weather forecasting with weather tendency indicator• Indoor comfort indicator• Temperature display in ºC/ºF• Indoor and outdoor temperature display with MIN/MAX records and time of reception• Humidity data display as RH%• Indoor and outdoor humidity display with MIN/MAX records• Relative air pressure hPa/ inHg with adjustable reference value••Weather icon sensitivity settingRelative air pressure history for the past 24 hours (electronic barometer with barometricpressure trend)• LCD contrast selectable• Can receive up to 3 outdoor transmitters• LED back light• Low battery indicator• Table standing or wall mountingThermo-Hygro Transmitter• Remote transmission of outdoor temperature andhumidity to weather station by 433 MHz signals• LCD showing outdoor temperature and humidity• Wall mounting caseTO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATIONThe Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. To installand replace the batteries, please follow the steps below:Hanging hole1. Insert finger or other solid object in the space at the bottomcenter of the battery compartment and lift up to remove thecover.2. Insert batteries observing the correct polarity (see marking).3. Replace compartment cover.BatterycompartmentTO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGROTRANSMITTERThe Thermo-Hygro Transmitter uses 2 x AAA, IEC, LR3, 1.5V batteries. To install and replace thebatteries, please follow the steps below:1. Unscrew the screw on the back of the compartment andremove the cover.2. Insert the batteries, observing the correct polarity (seemarking).3. Replace the battery cover on the unit and seal by re-screwing.Note:In the event of changing batteries in any of the units, all units need to be reset by following thesetting up procedures. This is due to a random security code assigned by the transmitter at start-up.This code must be received and stored by the Weather Station in the first 3 minutes of power beingsupplied to the transmitter.BATTERY CHANGE:It is recommended to replace the batteries in all units on an annual basis to ensure optimumaccuracy of these units.Please participate in the preservation of the environment. Return used batteries toan authorized depot.SETTING UP1. First, insert the batteries into the Weather station (see “How to install and replace batteriesin the Weather station” above). Once the batteries are in place, all segments of the LCD willlight up briefly and a short signal tone will sound. Then the indoor temperature and humidity,the time as 0:00 the date as TH.1., the moon icon, the weather icons (sun and clouds) will be