Laird WL 3000 User Manual

Laird WL 3000 User Manual Manual pdf 1 page image

Innovative Technologyfor a Connected WorldWL 3000User Manualglobal solutions: local support TMAmericas: +1.888.246.9050Europe: +46.31.704.67.57Asia: +86.755.2714.1166CAUTION: READ MANUAL BEFORE OPERATING COOLING UNIT– Input power must be rated for 230 VAC at 50 or 60 Hz.– Use water or water/glycol as coolant.– Run the cooling unit at the correct coolant level,otherwise cooling capacity will be reduced.– Clean the filter periodically, otherwise the pump may degrade over time.– Use cooling hoses that can handle max pressure of liquid circuit and isresistant to corrosion from coolant.-–Never operate the unit if it is damaged or leaking.– Before starting any service work on the cooling unit, please disconnectfrom the main power source.Page 1 / 9WL 10001201.38aeLaird Technologies Liquid Cooling SystemsCLV-customerservice@lairdtech.comwww.lairdtech.com/thermalInlet: O; outlet: OCoolant inlet and outlet are marked with symbols: