Lakeland Mills CF1126 Assembly Instructions Manual
  |
CF1126 CEDAR LOG CHAIRorCF1148 LOVE SEATPlease check contents before assembly. If any items are missing or damaged, do not take the unit backto the store. Call 1-800-427-5136 for customer service and we will save you time by correcting any prob-lems directly for you.NOTE: Read all instructions before starting. The two differences between the chair and the love seat arethe length of the seat and back. Do not completely tighten any screws until the unit is fullyassembled and setting on a level surface. Use a rubber mallet (or a block of wood between the ham-mer and the unit) to drive doweled ends into holes as far aspossible.LOG CHAIR & LOVE SEAT COMPONENTS LOG CHAIR & LOVE SEAT HARDWARE(Shown smaller than actual size)NOTE: Cracks or Checks in logs are part of thenatural beauty of cedar logs and should not beconsidered defects.TOOLS REQUIREDLay assembled seat on floor. Insert dowelend of uprights on assembled back into holeson the back seat rail, ad-just uprights in or out asneeded to align properly.Do not tap on seat backwith hammer.To keep the seat rail from splitting, lay the back onthe floor and drive the seat onto the dowelled endsby hitting on the bottom of the seat assembly.STEP 17/16” socket orwrenchOptionalpower drillFourteen 2 1/2” screwsTIPS A battery operated or electric drill will makeassembly faster and easier. Use a good quality penetrating oil or wood decksealer with a UV inhibitor & an anti-fungal.(Make sure product is intended for outdoor use.) If staining or finishing before assembling, tapeoff all dowel ends. (Finishes will cause the dow-els to swell, making assembly difficult.Tap uprights in or out until dowel drops into hole.Uprights |
Related manuals for Lakeland Mills CF1126
manualsdatabase
Your AI-powered manual search engine